$14.95

Download Now
Sold by onedollar on Tradebit
The world's largest download marketplace
2,939,586 satisfied buyers
Shopper Award

Konica Minolta Bizhub 601, Bizhub 751, Theory of Operation Manual

Theory of Operation Konica Minolta Bizhub 601, Bizhub 751;
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Konica Minolta Bizhub copier.
You can print, zoom or read any diagram, picture or page from this Theory of Operation Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Konica Minolta Bizhub 601, Bizhub 751 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

BIZHUB 751/601
OUTLINE
1. SYSTEM CONFIGURATION
2. PRODUCT SPECIFICATIONS
3. UNIT CONFIGURATION
4. PAPER PATH
COMPOSITION/OPERATION
5. OVERALL CONFIGURATION
5.1 TIME CHART WHEN THE POWER IS TURNED ON
5.2 CONTROL BLOCK DIAGRAM
6. SCANNER SECTION
6.1 COMPOSITION
6.2 DRIVE
6.3 OPERATION
6.3.1 SCAN/EXPOSURE LAMP CONTROL
6.3.2 ORIGINAL SIZE DETECTION CONTROL
6.3.3 AE CONTROL
6.3.4 IMAGE PROCESSING
7. WRITE SECTION
7.1 COMPOSITION
7.2 OPERATION
7.2.1 LASER BEAM PATH
7.2.2 WRITE CONTROL
7.2.3 POLYGON CONTROL
7.2.4 IMAGE STABILIZATION CONTROL
8. PHOTO CONDUCTOR SECTION
8.1 COMPOSITION
8.2 DRIVE
8.2.1 DRUM DRIVE
8.2.2 DRUM CLAW DRIVE
8.3 OPERATION
8.3.1 IMAGE CREATION CONTROL
8.3.2 DRUM CLAW CONTROL
8.3.3 COOLING AROUND THE DRUM
8.3.4 IMAGE STABILIZATION CONTROL
9. CHARGING SECTION
9.1 COMPOSITION
9.2 DRIVE
9.3 OPERATION
9.3.1 CHARGING CONTROL
9.3.2 WIRE CLEANING CONTROL
9.3.3 ERASE LAMP CONTROL
10.TRANSFER/SEPARATION SECTION
10.1 COMPOSITION
10.2 DRIVE
10.3 OPERATION
10.3.1 TRANSFER GUIDE CONTROL
10.3.2 TRANSFER/SEPARATION CONTROL
10.3.3 TRANSFER EXPOSURE LAMP CONTROL
10.3.4 WIRE CLEANING CONTROL
https://www.tradebit.comELOPING UNIT
11.1 COMPOSITION
11.2 DRIVE
11.3 OPERATION
11.3.1 CONVEYANCE OF DEVELOPER
11.3.2 DEVELOPING BIAS
11.3.3 DEVELOPING SUCTION CONTROL
11.3.4 IMAGE STABILIZATION CONTROL
https://www.tradebit.comER SUPPLY SECTION
12.1 COMPOSITION
12.2 DRIVE
12.3 OPERATION
12.3.1 TONER REMAINING DETECTION CONTROL
12.3.2 TONER SUPPLY CONTROL
12.3.3 TONER CONVEYANCE CONTROL
https://www.tradebit.comANING/TONER RECYCLE SECTION
13.1 COMPOSITION
13.2 DRIVE
13.3 OPERATION
13.3.1 TONER GUIDE ROLLER CONTROL
13.3.2 OTHER CONTROLS
13.3.3 IMAGE STABILIZATION CONTROL
https://www.tradebit.comER FEED SECTION (TRAYS 1 AND 2)
14.1 COMPOSITION
14.2 DRIVE
14.2.1 PAPER FEED DRIVE
14.2.2 TRAY LIFT DRIVE
14.3 OPERATION
14.3.1 UP/DOWN CONTROL
14.3.2 PAPER FEED CONTROL
14.3.3 PAPER EMPTY DETECTION CONTROL
14.3.4 REMAINING PAPER DETECTION CONTROL
14.3.5 HORIZONTAL CONVEYANCE CONTROL (TRAY 1)
https://www.tradebit.comER FEED SECTION (TRAYS 3 AND 4)
15.1 COMPOSITION
15.2 DRIVE
15.2.1 PAPER FEED DRIVE
15.2.2 TRAY LIFT DRIVE
15.3 OPERATION
15.3.1 UP/DOWN CONTROL
15.3.2 PAPER FEED CONTROL
15.3.3 PAPER SIZE DETECTION CONTROL
15.3.4 PAPER EMPTY DETECTION CONTROL
15.3.5 REMAINING PAPER DETECTION CONTROL
15.3.6 DEHUMIDIFICATION HEATER CONTROL
https://www.tradebit.comASS TRAY
16.1 COMPOSITION
16.2 DRIVE
16.2.1 PAPER FEED DRIVE
16.2.2 TRAY LIFT DRIVE
16.3 OPERATION
16.3.1 UP/DOWN CONTROL
16.3.2 PAPER SIZE DETECTION CONTROL
16.3.3 PAPER FEED CONTROL
16.3.4 PAPER EMPTY DETECTION CONTROL
16.3.5 REMAINING PAPER DETECTION CONTROL
https://www.tradebit.comTICAL CONVEYANCE SECTION
17.1 COMPOSITION
17.2 DRIVE
17.3 OPERATION
17.3.1 CONVEYANCE CONTROL
https://www.tradebit.comISTRATION SECTION
18.1 COMPOSITION
18.2 DRIVE
18.2.1 REGISTRATION DRIVE
18.2.2 LOOP ROLLER DRIVE
18.3 OPERATION
18.3.1 LOOP CONTROL
18.3.2 PAPER MIS-CENTERING CORRECTION CONTROL
https://www.tradebit.comIZONTAL CONVEYANCE SECTION
19.1 COMPOSITION
19.2 DRIVE
19.3 OPERATION
19.3.1 CONVEYANCE CONTROL
19.3.2 THICK PAPER SUPPORT MECHANISM
https://www.tradebit.com
20.1 COMPOSITION
20.2 DRIVE
20.2.1 ADU CONVEYANCE ROLLER DRIVE
20.2.2 ADU REVERSE ROLLER DRIVE
20.2.3 ADU PRE-REGISTRATION ROLLER DRIVE
20.2.4 REVERSE/EXIT ROLLER DRIVE
20.3 OPERATION
20.3.1 CONVEYANCE CONTROL
https://www.tradebit.comING SECTION
21.1 COMPOSITION
21.2 DRIVE
21.2.1 FUSING DRIVE
21.2.2 CLEANING WEB DRIVE
21.2.3 REVERSE/EXIT SWITCHING GATE DRIVE
21.3 OPERATION
21.3.1 WEB SOLENOID CONTROL
21.3.2 FUSING TEMPERATURE CONTROL
21.3.3 PROTECTION AGAINST ABNORMALITY
21.3.4 FUSING CONVEYANCE MECHANISM
https://www.tradebit.comERSE/EXIT SECTION
22.1 COMPOSITION
22.2 DRIVE
22.3 OPERATION
22.3.1 CONVEYANCE CONTROL
https://www.tradebit.comERFACE SECTION
23.1 COMPOSITION
23.2 SPECIFICATIONS
https://www.tradebit.comGE STABILIZATION CONTROL
24.1 OUTLINE
24.2 OPERATION FLOW
24.2.1 IMAGE STABILIZATION CONTROL FLOW WHEN THE POWER SWITCH (SW2) IS ON
24.2.2 IMAGE STABILIZATION CONTROL FLOW WHILE IN THE PRINT AND AFTER COMPLETION OF THE PRINT
https://www.tradebit.comGE PROCESSING
25.1 IMAGE PROCESSING IN THE SCANNER SECTION
25.1.1 SHADING CORRECTION
25.1.2 AE PROCESSING
25.1.3 AREA DISCRIMINATION
25.1.4 BRIGHTNESS/DENSITY CONVERSION
25.1.5 FILTER/MAGNIFICATION AND CONTRACTION
25.1.6 DENSITY GAMMA (CONVERSION)
25.1.7 TILT ADJUSTMENT
25.1.8 COMPRESSION
25.1.9 STORAGE OF IMAGE DATA
25.2 IMAGE PROCESSING IN THE WRITE SECTION
25.2.1 ELONGATION/ROTATION
25.2.2 1DOTPWM
25.2.3 FREQUENCY CONVERSION
https://www.tradebit.comERS
26.1 FAN CONTROL
26.1.1 COMPOSITION
26.1.2 OPERATION
26.2 COUNTER CONTROL
26.2.1 COMPOSITION
26.2.2 OPERATION
26.3 PARTS THAT OPERATE WHEN THE POWER SWITCH IS TURNED ON
26.3.1 PARTS THAT OPERATE WHEN THE POWER CORD IS PLUGGED INTO THE POWER OUTLET
26.3.2 PARTS THAT OPERATE WHEN THE MAIN POWER SWITCH (SW1) IS TURNED ON
26.3.3 PARTS THAT OPERATE WHEN THE POWER SWITCH (SW2) IS TURNED ON
26.4 AUTHENTICATION UNIT
26.4.1 AUTHENTICATION UNIT (BIOMETRIC TYPE) (AU-101)
26.4.2 AUTHENTICATION UNIT (IC CARD TYPE: AU-201)


DF-614
OUTLINE
1. PRODUCT SPECIFICATIONS
2. PAPER PATH
2.1 SINGLE SIDED ORIGINAL MODE
2.2 DOUBLE SIDED ORIGINAL MODE
2.2.1 REAR SCAN 1
2.2.2 REAR SCAN 2
2.2.3 FRONT SCAN
2.3 MIXED ORIGINAL MODE
2.3.1 AMS NOT USED
2.3.2 AMS USED (SINGLE SIDED/DOUBLE SIDED)
2.4 Z-FOLDING ORIGINAL MODE
COMPOSITION/OPERATION
3. COMPOSITION
4. PAPER FEED SECTION
4.1 DRIVE
4.1.1 PAPER FEED DRIVE
4.1.2 ORIGINAL STOPPER DRIVE
4.2 OPERATION
4.2.1 SIZE DETECTION CONTROL
4.2.2 PICK-UP MECHANISM
4.2.3 SEPARATION MECHANISM
4.2.4 ORIGINAL EMPTY DETECTION CONTROL
4.2.5 REGISTRATION CONTROL
5. CONVEYANCE SECTION
5.1 DRIVE
5.1.1 CONVEYANCE DRIVE 1
5.1.2 CONVEYANCE DRIVE 2
5.1.3 CONVEYANCE ROLLER PRESSURE/RELEASE DRIVE
5.2 OPERATION
5.2.1 CONVEYANCE CONTROL
5.2.2 SKEW ADJUSTMENT CONTROL
5.2.3 COOLING FAN CONTROL
6. REVERSE SECTION
6.1 DRIVE
6.1.1 REVERSE DRIVE
6.1.2 REVERSE GATE DRIVE
6.2 OPERATION
6.2.1 REVERSE CONTROL
6.2.2 MIXED ORIGINAL MODE CONTROL
6.2.3 Z-FOLD ORIGINAL MODE CONTROL
7. ORIGINAL EXIT SECTION
7.1 DRIVE
7.1.1 EXIT GATE DRIVE
7.2 OPERATION
7.2.1 PAPER EXIT MECHANISM
7.2.2 STAMP CONTROL

LU-405/406
OUTLINE
1. PRODUCT SPECIFICATIONS
2. PAPER PATH
COMPOSITION/OPERATION
3. COMPOSITION
4. PAPER FEED SECTION
4.1 DRIVE
4.2 OPERATION
4.2.1 PAPER FEED CONTROL
4.2.2 PAPER EMPTY DETECTION CONTROL
4.2.3 REMAINING PAPER DETECTION CONTROL
5. UP/DOWN SECTION
5.1 DRIVE
5.2 OPERATION
5.2.1 UP/DOWN CONTROL
5.2.2 DEHUMIDIFICATION HEATER CONTROL
5.2.3 INTERLOCK CONTROL

SF-602
OUTLINE
1. PRODUCT SPECIFICATIONS
2. PAPER PATH
COMPOSITION/OPERATION
3. COMPOSITION
4. CONVEYANCE SECTION
4.1 DRIVE
4.2 OPERATION
4.2.1 CONVEYANCE CONTROL
4.2.2 PAPER STACK ALIGNMENT MECHANISM
4.2.3 CONVEYANCE COVER OPEN/CLOSE DETECTION CONTROL
5. TRAY SECTION
5.1 DRIVE
5.1.1 SHIFT DRIVE
5.1.2 TRAY UP DOWN DRIVE
5.2 OPERATION
5.2.1 SHIFT CONTROL
5.2.2 TRAY UP DOWN CONTROL

FS-524/525/610
OUTLINE
1. PRODUCT SPECIFICATIONS
2. PAPER PATH
2.1 NON-SORT/SORT/GROUP MODE
2.2 SUB TRAY MODE
2.3 STAPLING MODE
2.4 FOLDING/SADDLE STITCHING MODE (FS-610)
2.5 TRI-FOLDING MODE (FS-610)
COMPOSITION/OPERATION
3. COMPOSITION
4. TRANSFER SECTION
4.1 DRIVE
4.2 OPERATION
4.2.1 PUNCH REGISTRATION CONTROL (AVAILABLE ONLY WHEN PK IS INSTALLED)
4.2.2 FS TRANSFER CONTROL
4.2.3 GATE DRIVE CONTROL
4.2.4 BYPASS GATE CONTROL
4.2.5 SHIFT CONTROL
4.2.6 PAPER EXIT ROLLER CONTROL
4.2.7 PAPER EXIT OPENING SOLENOID CONTROL
4.2.8 PAPER EXIT OPENING CONTROL
4.2.9 SUB TRAY PAPER EXIT CONTROL
5. MAIN TRAY SECTION
5.1 DRIVE
5.2 OPERATION
5.2.1 TRAY LIFT CONTROL
6. STACKER SECTION (FS-524/525)
6.1 DRIVE
6.2 OPERATION
6.2.1 ALIGNMENT CONTROL
6.2.2 STOPPER CONTROL
6.2.3 STACKER ENTRANCE TRANSFER CONTROL
6.2.4 STACKER PAPER EXIT CONTROL
7. STACKER SECTION (FS-610)
7.1 DRIVE
7.2 OPERATION
7.2.1 ALIGNMENT /UP CONTROL
7.2.2 ALIGNMENT /LW CONTROL
7.2.3 STOPPER CONTROL
7.2.4 STACKER ENTRANCE TRANSFER CONTROL
7.2.5 STACKER PAPER EXIT CONTROL
8. STAPLER (FS-524/525)
8.1 DRIVE
8.2 OPERATION
8.2.1 STAPLER MOVEMENT CONTROL
8.2.2 STAPLER CONTROL
9. STAPLER (FS-610)
9.1 DRIVE
9.2 OPERATION
9.2.1 STAPLER MOVEMENT CONTROL
9.2.2 STAPLER CONTROL
https://www.tradebit.comDING/SADDLE STITCHING/TRI-FOLDING (FS-610)
10.1 DRIVE
10.2 OPERATION
10.2.1 FOLDING KNIFE CONTROL
10.2.2 FOLDING TRANSFER CONTROL
10.2.3 TRI-FOLDING GATE CONTROL

PI-504
OUTLINE
1. PRODUCT SPECIFICATIONS
2. PAPER PATH
2.1 AUTO SHEET FEEDING (ONLINE OPERATION)
2.2 MANUAL SHEET FEEDING (OFFLINE OPERATION)
COMPOSITION/OPERATION
3. COMPOSITION
4. PAPER FEED SECTION
4.1 DRIVE
4.1.1 PAPER FEED DRIVE
4.1.2 TRAY LIFT DRIVE
4.2 OPERATION
4.2.1 TRAY LIFT MECHANISM
4.2.2 PICK-UP MECHANISM
4.2.3 SEPARATION MECHANISM
4.2.4 REGISTRATION CONTROL
4.2.5 PAPER SIZE DETECTION CONTROL

PK-502
OUTLINE
1. PRODUCT SPECIFICATIONS
2. PAPER PATH
COMPOSITION/OPERATION
3. COMPOSITION
4. PUNCH SECTION
4.1 DRIVE
4.2 OPERATION
4.2.1 PUNCH CONTROL
5. PUNCH SCRAPS BOX SECTION
5.1 DRIVE
5.2 OPERATION
5.2.1 PUNCH SCRAPS BOX CONTROL

PK-503/504/505
OUTLINE
1. PRODUCT SPECIFICATIONS
2. PAPER PATH
COMPOSITION/OPERATION
3. COMPOSITION
4. PUNCH SECTION
4.1 DRIVE
4.1.1 PUNCH SHIFT DRIVE
4.1.2 PUNCH DRIVE
4.2 OPERATION
4.2.1 PUNCHED HOLE NO. SWITCHING OPERATION (PK-505 ONLY)
4.2.2 PUNCH STANDBY POSITION MOVEMENT CONTROL
(FOR EXPLANATION, THE PART NUMBER FOR PK-505 IS USED.)
4.2.3 PUNCH POSITION CORRECTION CONTROL (FOR EXPLANATION, THE PART NUMBER FOR PK-505 IS USED.)
4.2.4 PUNCH CONTROL
5. PUNCH SCRAPS BOX SECTION
5.1 DRIVE
5.2 OPERATION
5.2.1 PUNCH SCRAPS BOX CONTROL (FOR EXPLANATION, THE PART NUMBER FOR PK-505 IS USED.)

ZU-604/605
OUTLINE
1. PRODUCT SPECIFICATIONS
2. PAPER PATH
COMPOSITION/OPERATION
3. COMPOSITION
4. CONVEYANCE SECTION
4.1 DRIVE
4.2 OPERATION
4.2.1 CONVEYANCE PATH SWITCHING
4.2.2 CONVEYANCE LINE SPEED SWITCHING
4.2.3 REGISTRATION CONTROL
5. PUNCH SECTION
5.1 DRIVE
5.2 OPERATION
5.2.1 PUNCH CONTROL
5.2.2 PUNCH POSITION MOVEMENT CONTROL
5.2.3 PUNCH HOLE SWITCHING CONTROL (ZU-605)
6. PUNCH SCRAPS CONVEYANCE SECTION
6.1 DRIVE
6.2 OPERATION
6.2.1 PUNCH SCRAPS CONVEYANCE CONTROL
6.2.2 PUNCH SCRAPS CONTROL
7. Z-FOLDING SECTION
7.1 DRIVE
7.2 OPERATION
7.2.1 1ST FOLDING CONTROL
7.2.2 2ND FOLDING CONTROL

Number of pages: 368.
File Data

This file is sold by onedollar, an independent seller on Tradebit.

File Size 11 megabytes
File Type PDF
Our Reviews
© Tradebit 2004-2020
All files are property of their respective owners
Questions about this file? Contact onedollar
DMCA/Copyright or marketplace issues? Contact Tradebit