$14.95
Download NowSold by onedollar on Tradebit
The world's largest download marketplace
3,251,083 satisfied buyers
The world's largest download marketplace
3,251,083 satisfied buyers
Toshiba e-STUDIO 200L, e-STUDIO 230, e-STUDIO 280, e-STUDIO 202L, e-STUDIO 232, e-STUDIO 282, e-STUDIO 203L, e-STUDIO 233, e-STUDIO 283, Handbook Manual
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your copier.
You can print, zoom or read any diagram, picture or page from this HandBook Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Toshiba e-STUDIO 200L, e-STUDIO 230, e-STUDIO 280, e-STUDIO 202L, e-STUDIO 232, e-STUDIO 282, e-STUDIO 203L, e-STUDIO 233, e-STUDIO 283 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:
1. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1.1 Specifications
1.2 Accessories
1.3 Options
1.3.1 e-STUDIO 200L/230/230L/280/280S
1.3.2 e-STUDIO 202L/203L/232/232S/233/282/282S/283/283S
1.4 Supplies
1.4.1 e-STUDIO 200L/230/230L/280/280S
1.4.2 e-STUDIO 202L/232/232S/282/282S
1.4.3 STUDIO 203L/233/283/283S
1.5 System List
1.5.1 e-STUDIO 200L/230/230L/280/280S
1.5.2 e-STUDIO 202L/203L/232/232S/233/282/282S/283/283S
2. ERROR CODE AND SELF-DIAGNOSTIC MODE
2.1 Error Code List
2.1.1 Jam
2.1.2 Service call
2.1.3 Error in Internet FAX / Scanning Function
2.1.4 Printer function error
2.2 Self-diagnosis Modes
2.2.1 Input check (Test mode 03) (e-STUDIO 200L/230/280)
2.2.2 Input check (Test mode 03) (e-STUDIO 202L/203L/232/233/282/283)
2.2.3 Output check (test mode 03)
2.2.4 Test print mode (test mode 04)
2.2.5 Adjustment mode (05) (e-STUDIO 200L/230/280)
2.2.6 Adjustment mode (05) (e-STUDIO 202L/203L/232/233/282/283)
2.2.7 Setting mode (08) (e-STUDIO 200L/230/280)
2.2.8 Setting mode (08) (e-STUDIO 202L/203L/232/233/282/283)
2.2.9 Pixel counter
2.2.10 Classification List of Adjustment Mode (05) / Setting Mode (08) (e-STUDIO 200L/230/280)
2.2.11 Classification List of Adjustment Mode (05) / Setting Mode (08) (e-STUDIO 202L/203L/232/233/282/283)
3. ADJUSTMENT
3.1 Adjustment of Auto-Toner Sensor
3.2 Image Dimensional Adjustment
3.2.1 General description
3.2.2 Paper alignment at the registration roller
3.2.3 Printer related adjustment
3.2.4 Scanner related adjustment
3.3 Image Quality Adjustment (Copying Function)
3.3.1 Density adjustment
3.3.2 Gamma slope adjustment
3.3.3 Sharpness adjustment
3.3.4 Setting range correction
3.3.5 Setting range correction (Adjustment of background peak)
3.3.6 Adjustment of smudged/faint text
3.3.7 Gamma balance adjustment < e-STUDIO 202L/203L/232/233/282/283 >
3.3.8 Adjustment of image density
3.4 Image Quality Adjustment (Printing Function)
3.4.1 Adjustment of smudged/faint text
3.4.2 Adjustment of image density
3.5 Image Quality Adjustment (Scanning Function)
3.5.1 Density adjustment
3.5.2 Sharpness adjustment
3.5.3 Setting range correction
3.5.4 Setting range correction (Adjustment of background peak)
3.5.5 Setting range correction (Adjustment of text peak)
3.6 Adjustment of High-Voltage Transformer
3.6.1 Adjustment
3.6.2 Precautions
3.7 Adjustment of the Scanner Section
3.7.1 Carriages
3.7.2 Lens unit
3.8 Adjustment of the Paper Feeding System
3.8.1 Sheet sideways deviation caused by paper feeding
3.9 Adjustment of Developer Unit
3.9.1 Doctor-to-sleeve gap
3.10 Adjustment of the RADF (MR-3016)
3.10.1 Adjustment of RADF position
3.10.2 Adjustment of RADF height
3.10.3 Adjustment of skew
3.10.4 Automatic adjustment of sensors and initialization of EEPROM
3.10.5 Adjustment of aligning
3.10.6 Adjustment of aligning at reversing
3.10.7 Adjustment of reverse solenoid
3.10.8 Adjustment of RADF opening/closing switch
3.10.9 Adjustment of RADF opening/closing sensor
3.10.10Adjustment of tray volume
3.11 Adjustment of the RADF (MR-3020)
3.11.1 Adjustment of RADF Position
3.11.2 Adjustment of RADF Height
3.11.3 Adjustment of Skew
3.11.4 Adjustment of the Leading Edge Position
3.11.5 Adjustment of Horizontal Position
3.11.6 Adjustment of Copy Ratio
3.11.7 Adjustment of RADF Opening/Closing Sensor
3.12 Adjustment of the Finisher (MJ-1022)
3.12.1 Adjusting the jogging plate width
3.12.2 Adjusting the angle of the jogging plate
3.12.3 Adjusting the overlap of the sensor flag
3.12.4 Adjusting the tension of the stack processing motor belt
3.12.5 Releasing the stack tray guide lever fixing plate
3.12.6 Adjustment of the upper tray angle
3.12.7 DIP switch functions
3.13 Adjustment of the Finisher (MJ-1025)
3.13.1 Adjusting the folding position (Electrical system (Finisher/Saddle unit))
3.13.2 Adjusting the sensor output (Electrical system (Puncher unit; option))
3.13.3 Registering the number of punch hole (Electrical system (Puncher unit; option))
3.13.4 After replacing the EEP-ROM (IC1002) (Electrical system (Puncher unit; option))
3.14 Key Copy Counter (MU-8, MU-10)
3.15 Adjustment of Dogleg
4. PREVENTIVE MAINTENANCE (PM)
4.1 PM Support Mode
4.1.1 General description
4.1.2 Operational flow and operational screen
4.1.3 Work flow of parts replacement
4.2 General Descriptions for PM Procedure
4.3 Operational Items in Overhauling
4.4 Preventive Maintenance Checklist
4.5 PM KIT
4.6 Jig List
4.7 Grease List
4.8 Precautions for Storing and Handling Supplies
4.8.1 Precautions for storing TOSHIBA supplies
4.8.2 Checking and cleaning of photoconductive drum
4.8.3 Checking and cleaning of drum cleaning blade
4.8.4 Checking and cleaning of fuser roller and pressure roller
4.8.5 Checking and replacing the cleaning roller
5. TROUBLESHOOTING
5.1 Diagnosis and Prescription for Each Error Code
5.1.1 Paper transport jam
5.1.2 Paper misfeeding
5.1.3 Cover open jam
5.1.4 Transport jam (RADF)
5.1.5 Finisher jam
5.1.6 Drive system related service call
5.1.7 Paper feeding system related service call
5.1.8 Scanning system related service call
5.1.9 Fuser unit related service call
5.1.10 Communication related service call
5.1.11 RADF related service call (MR-3016)
5.1.12 RADF related service call (MR-3020)
5.1.13 Laser optical unit related service call
5.1.14 Finisher related service call
5.1.15 Service call for others
5.1.16 Error in Internet FAX / Scanning Function
5.2 Troubleshooting for the Image
5.3 Replacement of PC Boards and HDD
5.3.1 Replacing HDD
5.3.2 Replacing SYS board
5.3.3 Caution when Data overwrite kit (GP-1050/1060) is installed
5.3.4 HDD information display
5.3.5 Replacing or clearing NVRAM
6. FIRMWARE UPDATING
6.1 Firmware Updating with Download Jig (e-STUDIO 200L/230/280)
6.1.1 PWA-DWNLD-350-JIG2 (48 MB)
6.1.2 PWA-DWNLD-350-JIG1 (16 MB)
6.1.3 Writing the data to the download jig (PWA-DWNLD-350-JIG)
6.1.4 K-PWA-DLM-320
6.2 Firmware Updating with Download Jig (e-STUDIO 202L/203L/232/233/282/283)
6.2.1 PWA-DWNLD-350-JIG2 (48 MB)
6.2.2 Writing the data to the download jig (PWA-DWNLD-350-JIG)
6.2.3 K-PWA-DLM-320
6.3 Firmware Updating with FSMS (Field Service Manager) (e-STUDIO200L/230/280)
6.4 Firmware Updating with USB Storage Device (e-STUDIO 200L/230/280)
6.5 Firmware Updating with USB Storage Device (e-STUDIO 202L/203L/232/233/282/283)
6.6 Appendix
6.6.1 e-STUDIO200L/230/280
6.6.2 e-STUDIO202L/203L/232/233/282/283
7. POWER SUPPLY UNIT
7.1 Output Channel
7.2 Fuse
7.3 Configuration of Power Supply Unit
8. REMOTE SERVICE
8.1 Auto Supply Order
8.1.1 Outline
8.1.2 Setting Item
8.1.3 Setting procedure
8.1.4 Order Sheet Format
8.2 Service Notification
8.2.1 Outline
8.2.2 Setting (e-STUDIO 200L/230/280)
8.2.3 Items to be notified (e-STUDIO 200L/230/280)
8.2.4 Setting (e-STUDIO 202L/203L/232/233/282/283)
8.2.5 Items to be notified (e-STUDIO 202L/203L/232/233/282/283)
9. DATA CLONING with USB STORAGE DEVICE (e-STUDIO 202L/203L/232/233/282/283)
10. WIRE HARNESS CONNECTION DIAGRAMS
10.1 AC Wire Harness
10.2 DC Wire Harness (e-STUDIO200L/230/230L/280/280S)
10.3 Connector Table (e-STUDIO200L/230/230L/280/280S)
10.4 DC Wire Harness (e-STUDIO202L/232/282)
10.5 Connector Table (e-STUDIO202L/232/282)
Number of pages: 760.
File Data
This file is sold by onedollar, an independent seller on Tradebit.
| File Size | 37 megabytes |
| File Type |