$14.95

Download Now
Sold by onedollar on Tradebit
The world's largest download marketplace
3,247,664 satisfied buyers
Shopper Award

CANON iR6570, iR5570, Service Manual

Service Manual CANON iR6570, iR5570;
This manual, CANON iR6570, iR5570, is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your CANON iR6570, iR5570 copier.
You can print, zoom or read any diagram, picture or page from this Service Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of CANON iR6570, iR5570 photocopier. You can find easily everything what do you need.
To see what contain, please read table of contents:

Chapter 1: INTRODUCTION
1.1 System Construction
1.1.1System Configuration with Input/Output Accessories
1.1.2System Configuration with Printing/Transmission Accessories (230V)
1.1.3Functions and Printing/Transmission Accessories (230V)
1.2 Product Specifications
1.2.1 Names of Parts
1.2.1.1 External view
1.2.1.2 Cross-Section
1.2.2 Using the Machine
1.2.2.1 Turning On the Power Switch
1.2.2.2 Turning Off the Power Switch
1.2.2.3 Control Panel
1.2.3 User Mode Items
1.2.3.1 Common Settings
1.2.3.2 Timer Settings
1.2.3.3 Adjustment/Cleaning
1.2.3.4 Report Output
1.2.3.5 System Control Settings
1.2.3.6 Copier Specifications
1.2.3.7 Transmission/Reception Settings
1.2.3.8 Box Settings
1.2.3.9 Printer Settings
1.2.3.10 Address Book Settings
1.2.3.11 Voice Guide Settings
1.2.4 Maintenance by the User
1.2.4.1 Cleaning
1.2.4.2 Checks
1.2.5 Safety
1.2.5.1 Safety of the Machine's Laser Unit
1.2.5.2 CDRH Regulations
1.2.5.3 Handling the Machine's Laser Unit
1.2.5.4 Safety of Toner
1.2.6 Product Specifications
1.2.6.1 Product Specifications
1.2.7 Function List
1.2.7.1 Paper Types
1.2.7.2 Printing Speed

Chapter 2: INSTALLATION
2.1 Making Pre-Checks
2.1.1Selecting the Site
2.1.2Checking the Contents
2.1.3Name of Parts
2.2 Unpacking and Installation
2.2.1Points to Note Before Starting the Work
2.2.2Unpacking
2.2.3Installing the Scanner
2.2.4Installing the Fixing Assembly
2.2.5Checking the Corona Assembly and the Dust-proofing Glass
2.2.6Installing the Developing Assembly
2.2.7Installing the Pick-up Assembly
2.2.8Installing the Deck Pressure Plate
2.2.9Setting Up the Toner Bottle
2.2.10Connecting the Reader Communication Cable
2.2.11Checking the Environment Switch
2.2.12Turning on the Main Power
2.2.13Stirring the Toner
2.2.14Setting the Cassette
2.2.15Index Paper Attachment
2.2.16Changing Paper Size of the Front Deck (Left/Right)
2.2.17Checking Images/Operations, User Mode
2.2.18Adjusting Side Registration
2.2.19Adjusting Leading Edge Registration
2.2.20Getting the Machine Ready for Installation
2.3 Checking the Connection to the Network
2.3.1Overview
2.3.2Ping Operating Procedure
2.3.3Checking with Remote Host Address
2.4 Troubleshooting the Network
2.4.1Overview
2.4.2Checking with Loopback Address
2.4.3Checking with Local Host Address
2.5 Installing the Copy Tray
2.5.1Checking the Contents
2.5.2Turning Off the Host Machine
2.5.3Installation Procedure for the Copy Tray-L1
2.6 Installing the Card Reader
2.6.1Installation Procedure for the Card Reader
2.6.2Checking the Contents
2.6.3Turning Off the Host Machine
2.6.4Installation Procedure
2.7 Installing the NE Controller
2.7.1Installing the NE Controller-A1
2.8 Installing the Original Holder
2.8.1Checking the Contents
2.8.2Installation Procedure
2.9 Installing the Cassette Heater
2.9.1Checking the Contents
2.9.2Turning Off the Host Machine
2.9.3Mounting the Cassette Heater

Chapter 3: BASIC OPERATION
3.1 Construction
3.1.1Functional Construction
3.1.2Wiring Diagram of the Major PCBs
3.1.3Controlling the Main Motor (M2)
3.2 Basic Sequence
3.2.1Basic Sequence of Operation (at power-on; 30-sec start-up mode)
3.2.2Basic Sequence of Operation (at power-on; low-temperature start-up mode)
3.2.3Basic Sequence of Operation (at power-on; high-humidity start-up mode)
3.2.4Basic Sequence of Operation (at time of copying/printing)

Chapter 4: MAIN CONTROLLER
4.1 Construction
4.1.1Construction and Mechanisms
4.2 Construction of the Electrical Circuitry
4.2.1Main Controller PCB
4.2.2HDD
4.3 Start-Up Sequence
4.3.1Overview
4.3.2Start-Up Sequence
4.4 Shut-Down Sequence
4.4.1Overview
4.4.2Flow of Operation
4.5 Image Processing
4.5.1Overview of the Image Flow
4.5.2Construction of the Image Processing Module
4.5.3Reader Unit Input Image Processing
4.5.4Compression/ Extension/ Editing Block
4.5.5Printer unit Output Image Processing
4.6 Flow of Image Data
4.6.1Flow of Image Data According to Copy Functions
4.6.2Flow of Image Data for the Box Function
4.6.3Flow of Image Data for the SEND Function
4.6.4Flow of Image Data for the Fax Transmission
4.6.5Flow of Image Data for the Fax Reception Function
4.6.6Flow of Image Data for the PDL Function
4.7 Parts Replacement Procedure
4.7.1 Main Controller Box
4.7.1.1 Removing the Rear Cover (upper)
4.7.1.2 Removing the Main Controller Box
4.7.2 Main Controller PCB
4.7.2.1 Removing the Main Controller PCB
4.7.2.2 After Replacing the Main Controller PCB
4.7.3 SDRAM
4.7.3.1 Removing the SDRAM
4.7.4 Boot ROM
4.7.4.1 Removing the Boot ROM
4.7.5 HDD
4.7.5.1 Removing the HDD
4.7.5.2 After Replacing the HDD
4.7.6 Controller Fan
4.7.6.1 Removing the Controller Cooling Fan

Chapter 5: ORIGINAL EXPOSURE SYSTEM
5.1 Construction
5.1.1Specifications, Controls, and Functions
5.1.2Major Components
5.1.3Construction of the Control System
5.1.4Reader Controller PCB
5.2 Basic Sequence
5.2.1Basic Sequence of Operations
5.2.2Basic Sequence of Operation in Response to a Press on the Start Key
5.3 Various Control
5.3.1 Controlling the Scanner Drive System
5.3.1.1 Overview
5.3.1.2 Controlling the Scanner Motor
5.3.2 Enlargement/Reduction
5.3.2.1 Changing the Magnification in Main Scanning Direction
5.3.2.2 Changing the Magnification in Sub Scanning Direction
5.3.3 Controlling the Scanning Lamp
5.3.3.1 Overview
5.3.3.2 Scanning Lamp
5.3.3.3 Controlling the Activation
5.3.4 Detecting the Size of Originals
5.3.4.1 Overview
5.3.4.2 Points of Measurement Used for Original Size Identification
5.3.4.3 Overview of Operation
5.3.5 Dirt Sensor Control
5.3.5.1 Dust Detection in Stream Reading Mode
5.3.5.2 White Plate Dust Detection Control
5.3.6 Image Processing
5.3.6.1 Overview
5.3.6.2 CCD Drive
5.3.6.3 CCD Output Gain Correction, Offset Correction
5.3.6.4 CCD Output A/D Conversion
5.3.6.5 Outline of Shading Correction
5.3.6.6 Shading Adjustment
5.3.6.7 Shading Correction
5.4 Parts Replacement Procedure
5.4.1 CCD Unit
5.4.1.1 Removing the Copyboard Glass
5.4.1.2 Removing the CCD Unit Cover
5.4.1.3 Removing the Original Size Sensor Unit
5.4.1.4 Removing the CCD Unit
5.4.1.5 When Replacing the CCD Unit
5.4.2 Copyboard glass
5.4.2.1 Removing Copyboard Glass
5.4.2.2 When Replacing the Platen Board Glass
5.4.3 Scanning Lamp
5.4.3.1 Removing the Copyboard Glass
5.4.3.2 Removing the Right Cover (upper)
5.4.3.3 Removing the Reader Right Cover
5.4.3.4 Removing the Left Cover (upper)
5.4.3.5 Removing the Reader Left Cover
5.4.3.6 Removing the Reader Front Cover
5.4.3.7 Removing the Reader Unit Rear Cover
5.4.3.8 Removing the CCD Unit Cover
5.4.3.9 Removing the Scanning Lamp
5.4.3.10 When Replacing the Scanning Lamp
5.4.4 Reader Controller PCB
5.4.4.1 Removing the Copyboard Glass
5.4.4.2 Removing the CCD Unit Cover
5.4.4.3 Removing the Original Size Sensor Unit
5.4.4.4 Removing the Reader Controller PCB
5.4.4.5 After Replacing the Reader Controller PCB
5.4.5 Interface PCB
5.4.5.1 Removing the Reader Unit Rear Cover
5.4.5.2 Removing the Interface PCB
5.4.6 Inverter PCB
5.4.6.1 Removing the Copyboard Glass
5.4.6.2 Removing the CCD Unit Cover
5.4.6.3 Removing the Inverter PCB
5.4.6.4 When Replacing the Inverter PCB
5.4.7 Scanner Motor
5.4.7.1 Removing the Reader Unit Rear Cover
5.4.7.2 Removing the Scanner Motor
5.4.7.3 Mounting the Scanner Motor
5.4.8 ADF Open/Close Sensor
5.4.8.1 Removing the Reader Unit Rear Cover
5.4.8.2 Removing the ADF Open/Closed Sensor
5.4.9 Scanner HP Sensor
5.4.9.1 Removing the Reader Unit Rear Cover
5.4.9.2 Removing the Mirror Base Home Position Sensor
5.4.10 Original Size Sensor
5.4.10.1 Removing the Copyboard Glass
5.4.10.2 Removing the CCD Unit Cover
5.4.10.3 Removing the Original Size Sensor Unit
5.4.10.4 Removing the Original Size Sensor
5.4.11 Cooling Fan
5.4.11.1 Removing the Reader Unit Rear Cover
5.4.11.2 Removing the Cooling Fan
5.4.12 Scanner Drive Cable
5.4.12.1 Outline
5.4.12.2 Removing the Copyboard Glass
5.4.12.3 Removing the Right Cover (upper)
5.4.12.4 Removing the Reader Right Cover
5.4.12.5 Removing the Left Cover (upper)
5.4.12.6 Removing the Reader Left Cover
5.4.12.7 Removing the Reader Front Cover
5.4.12.8 Removing the Reader Unit Rear Cover
5.4.12.9 Removing the ADF
5.4.12.10 Removing the Control Panel
5.4.12.11 Removing the Scanner Drive Cable
5.4.12.12 Fitting the Scanner Drive Cable
5.4.12.13 Adjusting the Position of the No

Chapter 6: LASER EXPOSURE
6.1 Construction
6.1.1Overview
6.1.2Major Components
6.2 Basic Sequence
6.2.1Basic Sequence of Operation (laser exposure)
6.3 Various Controls
6.3.1 Controlling the Laser Activation Timing
6.3.1.1 Generating the Sync Signal
6.3.1.2 Flow of the Sync Signal
6.3.2 Controlling the Intensity of Laser Light
6.3.2.1 Controlling the Laser Intensity
6.3.2.2 APC Control
6.3.3 Controlling the Laser Scanner Motor
6.3.3.1 Controlling the Laser Scanner Motor
6.4 Parts Replacement Procedure
6.4.1 Laser Scanner Unit
6.4.1.1 Removing the Laser Scanner Unit
6.4.1.2 When Replacing the Scanner Unit

Chapter 7: IMAGE FORMATION
7.1 Construction
7.1.1Overview
7.1.2Major Components
7.2 Image Formation Process
7.2.1Overview
7.3 Basic Sequence
7.3.1At Power-On
7.3.2At Time of Printing
7.4 Potential Control
7.4.1Overview
7.4.2Copier/Printer Potential Control
7.4.3Determining the Primary Current
7.4.4Determining the Laser Output
7.4.5Determining the Developing Bias
7.4.6APC Correction
7.4.7Adjusting the Density in Various Modes
7.5 Charging Mechanism
7.5.1 Controlling Pre-Exposure LED
7.5.1.1 Pre-Exposure LED Control
7.5.2 Primary Charging Mechanism
7.5.2.1 Overview
7.5.2.2 Primary Charging Assembly Cleaning Mechanism
7.5.2.3 Others
7.5.3 Dust-Collecting Roller Bias
7.5.3.1 Overview
7.5.4 Pre-Transfer Charging Mechanism
7.5.4.1 Outline
7.5.4.2 Controlling the Output to Suit the Environment (fuzzy control)
7.5.4.3 Pre-Transfer Charging Assembly Cleaning Mechanism
7.5.4.4 Others
7.6 Drum Cleaner Unit
7.6.1Outline
7.6.2Detecting the State (full) of the Waste Toner Case
7.7 Developing Assembly
7.7.1Controlling the Developing Assembly Drive
7.7.2Controlling the Developing Bias
7.7.3Detecting the Toner Level and Controlling Toner Supply
7.8 Transfer Mechanism
7.8.1 Transfer Charging Mechanism
7.8.1.1 Outline
7.8.1.2 Controlling the Output to Suit the Environment (fuzzy control)
7.8.1.3 Transfer Charging Assembly Cleaning Mechanism
7.8.1.4 Others
7.9 Separation Mechanism
7.9.1 Separation Charging Mechanism
7.9.1.1 Outline
7.9.1.2 Correcting the Output to Suit the Environment and the Drum Surface Potential
7.9.1.3 Others
7.10 Parts Replacement Procedure
7.10.1 Process Unit
7.10.1.1 Removing the Primary Fan Duct
7.10.1.2 Removing the Developing Assembly
7.10.1.3 Removing the Process Unit
7.10.1.4 Mounting the Process Unit
7.10.2 Pre-Exposure Lamp
7.10.2.1 Removing the Primary Fan Duct
7.10.2.2 Removing the Developing Assembly
7.10.2.3 Removing the Process Unit
7.10.2.4 Removing the Primary Charging Assembly
7.10.2.5 Removing the Potential Sensor Assembly
7.10.2.6 Removing the Pre-Exposure Lamp Unit
7.10.2.7 Cleaning the Primary Anti-Stray Sheet
7.10.3 Primary Charging Assembly
7.10.3.1 Removing the Primary Fan Duct
7.10.3.2 Removing the Primary Charging Assembly
7.10.4 Pre-Transfer Charging Assembly
7.10.4.1 Removing the Primary Fan Duct
7.10.4.2 Removing the Pre-Transfer Charging Assembly
7.10.5 Photosensitive Drum
7.10.5.1 Points to Note When Handling the Photosensitive Drum
7.10.5.2 Removing the Primary Fan Duct
7.10.5.3 Removing the Developing Assembly
7.10.5.4 Removing the Process Unit
7.10.5.5 Removing the Primary Charging Assembly
7.10.5.6 Removing the Pre-Transfer Charging Assembly
7.10.5.7 Removing the Potential Sensor Assembly
7.10.5.8 Removing the Drum Unit
7.10.5.9 Cleaning the Photosensitive Drum
7.10.6 Drum Cleaner Unit
7.10.6.1 Construction
7.10.6.2 Removing the Primary Fan Duct
7.10.6.3 Removing the Developing Assembly
7.10.6.4 Sliding Out the Process Unit
7.10.6.5 Removing the Primary Charging Assembly
7.10.6.6 Removing the Cleaning Blade
7.10.6.7 Mounting the Cleaning Blade
7.10.6.8 Mounting the Side Seal
7.10.6.9 Cleaning the Cleaner Side Scraper
7.10.7 Drum Motor
7.10.7.1 Removing the Rear Cover (upper)
7.10.7.2 Removing the Rear Cover (lower)
7.10.7.3 Removing the Main Controller Box
7.10.7.4 Removing the Waste Toner Bottle Holder
7.10.7.5 Removing the Drum Motor
7.10.8 Photosensitive Drum Heater
7.10.8.1 Points to Note When Handling the Photosensitive Drum
7.10.8.2 Removing the Primary Fan Duct
7.10.8.3 Removing the Developing Assembly
7.10.8.4 Removing the Process Unit
7.10.8.5 Removing the Primary Charging Assembly
7.10.8.6 Removing the Pre-Transfer Charging Assembly
7.10.8.7 Removing the Potential Sensor Assembly
7.10.8.8 Removing the Drum Unit
7.10.8.9 Replacing the Drum Heater
7.10.8.10 Mounting the Drum Heater
7.10.9 Hopper Assembly
7.10.9.1 Removing the Primary Fan Duct
7.10.9.2 Removing the Hopper Assembly
7.10.10 Hopper Supply Motor
7.10.10.1 Removing the Primary Fan Duct
7.10.10.2 Removing the Right Cover (upper)
7.10.10.3 Removing the Front Cover
7.10.10.4 Removing the Hopper Supply Motor
7.10.11 Hopper Strring Motor
7.10.11.1 Removing the Primary Fan Duct
7.10.11.2 Removing the Right Cover (upper)
7.10.11.3 Removing the Hopper Stirring Motor
7.10.12 Developing Assembly
7.10.12.1 Removing the Developing Assembly
7.10.12.2 Cleaning the Developing Anti-Stray Sheet
7.10.13 Developing Cylinder
7.10.13.1 Removing the Developing Assembly
7.10.13.2 Removing the Blade Unit
7.10.13.3 Removing the Developing Cylinder
7.10.14 Developing Blade
7.10.14.1 Removing the Developing Assembly
7.10.14.2 Removing the Blade Unit
7.10.14.3 Mounting the Blade
7.10.15 Transfer/Separation Charging Assembly
7.10.15.1 Removing the Transfer/Separation Charging Assembly
7.10.15.2 Mounting the Transfer/Separation Charging Assembly
7.10.16 Separation Claw/Separation Claw Drive Assembly
7.10.16.1 Removing the Primary Fan Duct
7.10.16.2 Removing the Developing Assembly
7.10.16.3 Removing the Process Unit
7.10.16.4 Removing the Separation Claw Holder
7.10.17 Potential Sensor Unit
7.10.17.1 Outline
7.10.17.2 Removing the Left Cover (upper)
7.10.17.3 Removing the Left Cover (middle)
7.10.17.4 Removing the Fixing Heater Power Supply Unit
7.10.17.5 Removing the Potential Control PCB
7.10.17.6 Removing the Primary Fan Duct
7.10.17.7 Removing the Potential Sensor Assembly
7.10.18 Charging Wire
7.10.18.1 Outline
7.10.18.2 Routing the Charging Wire
7.10.18.3 Routing the Grid for the Primary Charging Assembly
7.10.18.4 Adjusting the Height of the Charging Wire

Chapter 8: PICKUP/FEEDING SYSTEM
8.1 Construction
8.1.1Specifications and construction
8.1.2Arrangement of Rollers and Sensors
8.1.3Outline of the Pickup Control System
8.1.4Outline of the Pickup Assembly Motor Control System
8.2 Basic Sequence
8.2.1Pickup from the Right Deck
8.2.2Pickup from the Cassette 3
8.2.3Pickup Retry Operation
8.3 Detecting Jams
8.3.1 Jam Detection Outline
8.3.1.1 Outline
8.3.1.2 Jam History
8.3.2 Delay Jams
8.3.2.1 Cassette Pickup Assembly (right deck, left deck, cassette 3/4)
8.3.2.2 Other Delay Jam
8.3.3 Stationary Jams
8.3.3.1 Common Delay Jams
8.3.3.2 Power-On Stationary Jam
8.4 Cassette Pick-Up Unit
8.4.1Lifter Operation (cassette 3/4)
8.4.2Detecting the Presence/Absence of Paper
8.4.3Outline of the Paper Level Detection Mechanism
8.4.4Paper Level Detection (cassette 3/4)
8.4.5Identifying the Size of Paper (cassette 3/4)
8.4.6Markings on the Width Guide Rail
8.4.7Paper Size
8.5 Manual Feed Pickup Unit
8.5.1Pickup Operation
8.5.2Detecting the Size of Paper in the Manual Feed Tray
8.6 Deck
8.6.1Lifter Operation (right/left deck)
8.6.2Lifter Limiter (right/left deck) Control Circuit
8.6.3Detecting the Presence/Absence of Paper
8.6.4Outline of Paper Level Detection
8.6.5Paper Level Detection Operation (right/left deck)
8.6.6Identifying the Size of Paper (right/left deck)
8.7 Registration Unit
8.7.1Outline
8.7.2Control System
8.8 Duplex Feeding Unit
8.8.1Moving the Paper to the Reversing Assembly After Printing on the 1st Side
8.8.2Moving the Paper to the Duplexing Feed Assembly From the Reversing Assembly
8.8.3Outline
8.8.4Sequence of Printing Operation
8.8.5Outline of Through-Path Operation
8.8.6Through-Path Operation
8.8.7Outline of Horizontal Registration Position
8.8.8Horizontal Registration Position Detection Operation
8.9 Delivery
8.9.1Reversal Delivery Operation
8.10 Parts Replacement Procedure
8.10.1 Pickup Roller
8.10.1.1 Removing the Right Deck/ Cassette Pickup Assembly
8.10.1.2 Removing the Left Deck Pickup Assembly
8.10.1.3 Removing the Pickup Roller
8.10.1.4 Orientation of the Deck/Cassette Pickup Roller
8.10.2 Cassette Pickup Assembly
8.10.2.1 Removing the Right Deck/ Cassette Pickup Assembly
8.10.3 Cassette Pickup Motor
8.10.3.1 Removing the Rear Cover (upper)
8.10.3.2 Removing the Rear Cover (lower)
8.10.3.3 Removing the Main Controller Box
8.10.3.4 Removing the Right Cover (lower rear)
8.10.3.5 Removing the Waste Toner Bottle Holder
8.10.3.6 Removing the Motor Driver PCB Base
8.10.3.7 Removing the Cassette Pickup Motor
8.10.4 Cassette Lifter Motor
8.10.4.1 Removing the cassette right cover
8.10.4.2 Removing the Lifter Motor M20 of the Cassette 3
8.10.4.3 Removing the Lifter Motor M21 of the Cassette 4
8.10.4.4 Adjusting the Position of the Lifter Motor M20 (M21) of the Cassette 3 (cassette 4)
8.10.5 Left Deck Lifter Motor
8.10.5.1 Removing the Rear Cover (lower)
8.10.5.2 Removing the HVT PCB
8.10.5.3 Removing the Left Deck Lifter Motor
8.10.6 Right Deck Lifter Motor
8.10.6.1 Removing the Rear Cover (upper)
8.10.6.2 Removing the Rear Cover (lower)
8.10.6.3 Removing the Main Controller Box
8.10.6.4 Removing the Right Cover (lower rear)
8.10.6.5 Removing the Waste Toner Bottle Holder
8.10.6.6 Removing the Motor Driver PCB Base
8.10.6.7 Removing the High-Voltage Power Supply PCB
8.10.6.8 Removing the Right Deck Lifter Motor
8.10.7 Right Deck Pickup Assembly
8.10.7.1 Removing the Right Deck/ Cassette Pickup Assembly
8.10.8 Left Deck Pickup Assembly
8.10.8.1 Removing the Left Deck Pickup Assembly
8.10.9 Left Deck Pickup Motor
8.10.9.1 Removing the Rear Cover (lower)
8.10.9.2 Removing the High-Voltage Power Supply PCB
8.10.9.3 Removing the Left Deck Pickup Motor
8.10.10 Right Deck Pickup Motor
8.10.10.1 Removing the Rear Cover (upper)
8.10.10.2 Removing the Rear Cover (lower)
8.10.10.3 Removing the Main Controller Box
8.10.10.4 Removing the Right Cover (lower rear)
8.10.10.5 Removing the Waste Toner Bottle Holder
8.10.10.6 Removing the Right Deck Pickup Motor
8.10.11 Left Deck Pickup Solenoid
8.10.11.1 Removing the Rear Cover (lower)
8.10.11.2 Removing the High-Voltage Power Supply PCB
8.10.11.3 Remove the Left Deck Pickup Solenoid
8.10.12 Manual Feed Unit
8.10.12.1 Removing the Manual Feed Unit
8.10.13 Manual Feed Pull-Out Roller Unit
8.10.13.1 Removing the Manual Feed Pull-Out Roller Unit
8.10.13.2 Removing the Manual Feed Pull-Out Roller
8.10.14 Manual Feed Roller
8.10.14.1 Removing the Manual Feed Pull-Out Roller Unit
8.10.14.2 Removing the Manual Feeding Roller
8.10.15 Manual Separation Roller
8.10.15.1 Removing the Manual Feed Pull-Out Roller Unit
8.10.15.2 Removing the Separation Roller
8.10.15.3 Adjusting the Pressure of the Separation Roller of the Manual Feed Tray
8.10.16 Manual Feed Tray sensor
8.10.16.1 Removing the Manual feed Tray Paper Sensor
8.10.17 Registration Roller
8.10.17.1 Removing the Fixing Upper Unit
8.10.17.2 Removing the Transfer/Separation Corona Assembly
8.10.17.3 Removing the Registration Clutch
8.10.17.4 Removing the Registration Roller
8.10.18 Pre-Registration Motor
8.10.18.1 Removing the Rear Cover (upper)
8.10.18.2 Removing the Main Controller Box
8.10.18.3 Removing the Pre-Registration Motor
8.10.19 Registration Clutch
8.10.19.1 Removing the Fixing Feed Unit
8.10.19.2 Removing the Registration Clutch
8.10.20 Feeding Roller
8.10.20.1 Removing the Right Deck/ Cassette Pickup Assembly
8.10.20.2 Removing the Left Pickup Assembly
8.10.20.3 Removing the Feeding Roller
8.10.20.4 Orientation of the Feeding Roller of the Deck/Cassette Pickup Assembly
8.10.21 Vertical Path Roller
8.10.21.1 Removing the Right Deck/ Cassette Pickup Assembly
8.10.21.2 Removing the Vertical Path Roller 1
8.10.21.3 Removing the Vertical Path Roller 3/4
8.10.22 Vertical Path Motor
8.10.22.1 Removing the Rear Cover (upper)
8.10.22.2 Removing the Rear Cover (lower)
8.10.22.3 Removing the Main Controller Box
8.10.22.4 Removing the Right Cover (lower rear)
8.10.22.5 Removing the Waste Toner Bottle Holder
8.10.22.6 Removing the Vertical Path Upper Motor
8.10.23 Vertical Path Duplex Motor
8.10.23.1 Removing the Rear Cover (upper)
8.10.23.2 Removing the Rear Cover (lower)
8.10.23.3 Removing the Main Controller Box
8.10.23.4 Removing the Right Cover (lower rear)
8.10.23.5 Removing the Waste Toner Bottle Holder
8.10.23.6 Removing the Vertical Path Duplex Motor
8.10.24 Vertical Path Lower Motor
8.10.24.1 Removing the Rear Cover (upper)
8.10.24.2 Removing the Rear Cover (lower)
8.10.24.3 Removing the Main Controller Box
8.10.24.4 Removing the Right Cover (lower rear)
8.10.24.5 Removing the Waste Toner Bottle Holder
8.10.24.6 Removing the Vertical Path Lower Motor
8.10.25 Fixing Feeding Unit Releasing Lever Sensor
8.10.25.1 Removing the Fixing Feed Unit
8.10.25.2 Removing the fixing Feed unit front cover
8.10.25.3 Removing the Fixing Feed Unit Releasing Lever Switch
8.10.26 Feeding Belt
8.10.26.1 Removing the Fixing Feed Unit
8.10.26.2 Removing the fixing Feed unit front cover
8.10.26.3 Removing the Feeding Belt
8.10.27 Duplexing Unit
8.10.27.1 Removing the Duplex Unit
8.10.27.2 Removing the Reversing Flapper Solenoid
8.10.27.3 Adjusting the Position of the Reversing Flapper Solenoid(SL8)
8.10.27.4 Removing the Reversal Motor
8.10.27.5 Mounting the Reversal Motor
8.10.27.6 Removing the Duplexing Feeding Left Motor
8.10.27.7 Removing the Duplex Feeding Right Motor
8.10.27.8 Removing the Duplex Pre-Registration Sensor
8.10.27.9 Removing the Reversal Sensor 1
8.10.27.10 Removing the Reversal Sensor 2
8.10.27.11 Removing the Left Deck Feed Paper Sensor
8.10.27.12 Removing the Duplex Driver PCB
8.10.27.13 Removing the Duplex Feeding Fan
8.10.27.14 Removing the Horizontal Registration Unit
8.10.28 Separation Roller
8.10.28.1 Removing the Right Deck/ Cassette Pickup Assembly
8.10.28.2 Removing the Left Deck Pickup Assembly
8.10.28.3 Removing the Separation Roller
8.10.28.4 Orientation of the Separation Roller
8.10.28.5 Adjusting the Pressure of the Separation Roller of the Deck/Cassette

Chapter 9: FIXING SYSTEM
9.1 Construction
9.1.1Specifications, Control Mechanisms, and Functions
9.1.2Major Components
9.1.3IH Fixing Method (outline)
9.1.4Limiting th Rise in Temperature at the Roller Edges by Use of a Flux blocking Plate (shutter)
9.2 Basic Sequence
9.2.1Outline
9.2.230-Sec Start-Up Mode
9.2.3Low-Temperature Environment Start-Up Mode
9.2.4High-Humidity Environment Start-Up Mode
9.2.5Recovery Mode
9.2.6Standby Mode
9.2.7Power Save Mode
9.2.8Sleep Mode
9.2.9Copying/Printing Mode
9.2.10Down Sequence
9.2.11Enhanced Fixing Mode
9.2.12Heavy Paper Mode
9.2.13Transparency Mode
9.2.14Bond Paper Mode
9.3 Various Control Mechanisms
9.3.1 Fixing Drive System
9.3.1.1 Controlling the Drive of the Fixing Roller
9.3.1.2 Controlling the Drive of the Fixing Inlet Guide
9.3.1.3 Controlling the Reciprocating Movement of the Thermistor
9.3.1.4 Controlling the Reciprocating Mechanism of the Upper Separation Claw
9.3.1.5 Controlling the Drive of the Shutter
9.3.1.6 Controlling the Shutter Position
9.3.2 Cleaning
9.3.2.1 Controlling the Drive of the Cleaning Web
9.3.2.2 Controlling the Mechanism Used to Detect the Remaining Length of the Cleaning Web
9.3.3 Detecting the Passage of Paper
9.3.3.1 Preventing Wrapping of Paper
9.4 Protective Functions
9.4.1Detecting an Error Using the Thermistor
9.4.2Detecting an Error Using the Thermal Switch
9.4.3Errors
9.5 Parts Replacement Procedure
9.5.1 Fixing/Feeding Assembly
9.5.1.1 Removing the Fixing Feed Unit
9.5.2 Fixing Unit
9.5.2.1 Removing the Fixing Upper Unit
9.5.3 Pressure Roller
9.5.3.1 Removing the Pressure Roller
9.5.4 Upper Fixing Roller
9.5.4.1 Removing the Fixing Roller
9.5.4.2 Points to Note When Mounting the Fixing Roller
9.5.4.3 Applying Grease After Replacing the Fixing Roller
9.5.4.4 Adjusting the Nip Width
9.5.5 External Delivery Roller
9.5.5.1 Removing the Outside Delivery Roller
9.5.6 Internal Delivery Roller
9.5.6.1 Removing the Inside Delivery Roller
9.5.6.2 Points to Note When Mounting the Inside Delivery Roller
9.5.7 Main Thermistor
9.5.7.1 Removing the Main Thermistor/Shutter Thermistor
9.5.7.2 Points to Note When Mounting the Thermistor/Shutter Thermistor
9.5.8 Sub Thermistor
9.5.8.1 Removing the Sub Thermistor
9.5.8.2 Point to Note When Mounting the Sub Thermistor
9.5.9 Thermal Switch
9.5.9.1 Removing the Thermal Switch
9.5.10 Fixing Heater
9.5.10.1 Removing the Fixing Heater Unit
9.5.11 Fixing Cleaning Belt
9.5.11.1 Removing the Fixing Web
9.5.11.2 Fitting the Fixing Web
9.5.11.3 After Replacing the Fixing Web
9.5.12 Fixing Jam Sensor
9.5.12.1 Removing the Delivery Jam Sensor
9.5.13 Claw Jam Sensor
9.5.13.1 Removing the Claw Jam Sensor
9.5.14 External Delivery Sensor
9.5.14.1 Removing the Outside Delivery Sensor
9.5.15 Internal Delivery Sensor
9.5.15.1 Removing the Inside Delivery Sensor
9.5.16 Fixing Inlet Sensor
9.5.16.1 Removing the Fixing Inlet Sensor
9.5.16.2 Adjusting the Fixing Inlet Guide
9.5.17 Fixing web sensor
9.5.17.1 Removing the Fixing Web Sensor
9.5.18 Fixing shutter sensor
9.5.18.1 Removing the Shutter Sensor
9.5.19 Fixing shutter motor
9.5.19.1 Removing the Shutter Motor
9.5.20 Fixing Inlet Guide Solenoid
9.5.20.1 Removing the Fixing Inlet Guide Solenoid (SL1)
9.5.20.2 Adjusting the Position of the Fixing Inlet Guide Solenoid (SL1)
9.5.21 Delivery Flapper Solenoid
9.5.21.1 Removing the Delivery Flapper Solenoid (SL5)
9.5.21.2 Points to Note when Mounting the Delivery Flapper Solenoid (SL5)
9.5.22 Fixing Cleaning Web Solenoid
9.5.22.1 Removing the Fixing Web Solenoid (SL9)
9.5.22.2 Adjusting the Position of the Fixing Web Solenoid (SL9)
9.5.23 Upper Separation Claw
9.5.23.1 Removing the Upper Separation Claw
9.5.23.2 Points to Note When Mounting the Upper Separation Claw
9.5.24 Lower Separation Claw
9.5.24.1 Removing the Lower Separation Claw Unit
9.5.24.2 Removing the lower Separation Claw

Chapter 10: EXTERNAL AND CONTROLS
10.1 Control Panel
10.1.1Overview
10.1.2LCD Indication Processing
10.1.3Adjusting the LCD Contrast
10.1.4Functions of the Control Panel CPU
10.2 Counters
10.2.1Soft Counters
10.3 Fans
10.3.1Arrangement, Functions, and Error Codes
10.3.2Controlling the Speed of the Fans
10.3.3Sequence of Operation
10.4 Power Supply System
10.4.1 Power Supply
10.4.1.1 Overview
10.4.1.2 Distribution of Power and the Switches
10.4.2 Rated Output of the DC Power Supply PCB
10.4.2.1 Rated Output of the Power Supply PCB
10.4.2.2 Rated Output of the Accessories Power Supply PCB
10.4.3 Protection Function
10.4.3.1 Protective Functions
10.4.4 Backup Battery
10.4.4.1 Backup Battery
10.4.5 Energy-Saving Function
10.4.5.1 Outline
10.5 Parts Replacement Procedure
10.5.1 Left Deck Drive Assembly
10.5.1.1 Removing the Rear Cover (lower)
10.5.1.2 Removing the High-Voltage Power Supply PCB
10.5.1.3 Left Deck Drive Assembly
10.5.2 Manual Feed Pickup Drive Assembly
10.5.2.1 Removing the Rear Cover (upper)
10.5.2.2 Removing the Rear Cover (lower)
10.5.2.3 Removing the Main Controller Box
10.5.2.4 Removing the Manual Feeder Pickup Drive Assembly
10.5.3 Vertical Path Drive Assembly
10.5.3.1 Removing the Rear Cover (upper)
10.5.3.2 Removing the Rear Cover (lower)
10.5.3.3 Removing the Main Controller Box
10.5.3.4 Removing the Right Cover (lower rear)
10.5.3.5 Removing the Waste Toner Bottle Holder
10.5.3.6 Removing the Motor Driver PCB Base
10.5.3.7 Removing the Vertical Path Drive Assembly
10.5.4 Waste Toner Drive Assembly
10.5.4.1 Removing the Rear Cover (upper)
10.5.4.2 Removing the Rear Cover (lower)
10.5.4.3 Removing the Main Controler Box
10.5.4.4 Removing the Waste Toner Bottle Holder
10.5.4.5 Removing the DC Controller Base
10.5.4.6 Removing the Waste Toner Drive Assembly
10.5.5 Main Drive Assembly
10.5.5.1 Fitting the Drive Belt
10.5.6 Cassette Pickup Drive Assembly
10.5.6.1 Removing the Rear Cover (upper)
10.5.6.2 Removing the Rear Cover (lower)
10.5.6.3 Removing the Main Controller Box
10.5.6.4 Removing the Right Cover (lower rear)
10.5.6.5 Removing the Waste Toner Bottle Holder
10.5.6.6 Removing the Motor Drive Base
10.5.6.7 Cassette Pickup Assembly
10.5.6.8 Removing the Cassette Pickup Drive Assembly
10.5.7 Control Panel
10.5.7.1 Removing the Right Cover (upper)
10.5.7.2 Removing the Reader Right Cover
10.5.7.3 Removing Copyboard Glass
10.5.7.4 Removing the Left Cover (upper)
10.5.7.5 Removing the Reader Left Cover
10.5.7.6 Removing the Reader Front Cover
10.5.7.7 Removing the Control Panel
10.5.8 DC Controller PCB
10.5.8.1 Removing the Rear Cover (upper)
10.5.8.2 Removing the DC Control PCB
10.5.8.3 When Replacing the DC Controller PCB
10.5.9 Printer Power Supply PCB
10.5.9.1 Removing the Left Cover (upper)
10.5.9.2 Removing the Left Cover (middle)
10.5.9.3 Removing the Lower Left Cover (lower)
10.5.9.4 Removing the Printer Power Supply PCB
10.5.10 Option Power Supply PCB
10.5.10.1 Removing the Rear Cover (lower)
10.5.10.2 Removing the Left Cover (upper)
10.5.10.3 Removing the Left Cover (middle)
10.5.10.4 Removing the Lower Left Cover
10.5.10.5 Accessories Power Supply PCB
10.5.11 Fixing Heater Power Supply PCB
10.5.11.1 Removing the Left Cover (upper)
10.5.11.2 Removing the Left Cover (middle)
10.5.11.3 Removing the Fixing Heater Power Supply Unit
10.5.11.4 Removing the Fixing Heater Power Supply PCB
10.5.12 Anti-Rush Current PCB
10.5.12.1 Removing the Rear Cover (upper)
10.5.12.2 Removing the Rush Current Prevention PCB
10.5.13 HVT PCB
10.5.13.1 Removing the Rear Cover (lower)
10.5.13.2 Removing the High-Voltage Power Supply PCB
10.5.13.3 Removing the High-Voltage Transformer
10.5.13.4 When Replacing the HVT PCB
10.5.14 Motor Driver PCB
10.5.14.1 Removing the Rear Cover (upper)
10.5.14.2 Removing the Rear Cover (lower)
10.5.14.3 Removing the Right Cover (lower rear)
10.5.14.4 Removing the Main Controller Box
10.5.14.5 Removing the Motor Drive PCB
10.5.15 Primary Charging Assembly Fan
10.5.15.1 Removing the Primary Charging Cooling Fan
10.5.17 Feeding Fan
10.5.17.1 Removing the Rear Cover (upper)
10.5.17.2 Removing the DC Controller PCB Base
10.5.17.3 Removing the Feed Fan
10.5.18 Exhaust Fan
10.5.18.1 Removing the Rear Cover (lower)
10.5.18.2 Removing the Exhaust Fan
10.5.19 DC Power Supply Fan
10.5.19.1 Removing the Left Cover (upper)
10.5.19.2 Removing the Left Cover (middle)
10.5.19.3 Removing the Lower Left Cover
10.5.19.4 Removing the Printer Power Supply PCB
10.5.19.5 DC Power Supply Fan
10.5.20 Fixing Heater Power Supply Cooling Fan
10.5.20.1 Removing the Left Cover (upper)
10.5.20.2 Removing the Left Cover (middle)
10.5.20.3 Removing the Fixing Heater Power Supply Unit
10.5.20.4 Removing the Fixing Heater Power Supply Cooling Fan
10.5.21 Circulation Duct Fan
10.5.21.1 Removing the Left Cover (upper)
10.5.21.2 Removing the Left Cover (middle)
10.5.21.3 Removing the Circulation Duct Fan
10.5.22 Motor of Main Drive Assembly
10.5.22.1 Removing the Rear Cover (upper)
10.5.22.2 Removing the Right Cover (lower rear)
10.5.22.3 Removing the Main Motor
10.5.23 Fixing Driver Motor
10.5.23.1 Removing the Fixing Motor

Chapter 11: MEAP
11.1 Overview
11.2 MEAP Counter
11.3 Construction of the MEAP Platform

Chapter 12: MAINTENANCE AND INSPECTION
12.1 Periodically Replaced Parts
12.1.1Outline
12.1.2Reader Unit
12.1.3Printer Unit
12.2 Durables and Consumables
12.2.1Outline
12.2.2Reader Unit
12.2.3Printer Unit
12.3 Scheduled Servicing Basic Procedure
12.3.1Scheduled Servicing Basic Procedure
12.3.2Periodical Servicing Chart Reader Unit
12.3.3Periodical Servicing Chart Printer Unit
12.3.4Points to Note for Periodical Servicing
12.4 Cleaning
12.4.1Cleaning the Primary Anti-Stray Sheet
12.4.2Cleaning the Developing Anti-Stray Sheet
12.4.3Cleaning the Cleaner Side Scraper
12.4.4Cleaning the Photosensitive Drum

Chapter 13: STANDARDS AND ADJUSTMENTS
13.1 Image Adjustment Basic Procedure
13.1.1Making Pre-Checks
13.1.2Making Checks on the Printer Unit (1/2)
13.1.3Making Checks on the Printer Unit (2/2)
13.1.4Making Checks on the Reader Unit
13.1.5Checking the Potential System
13.1.6Checking the Surface Potential Control System
13.1.7Potential Control System Conversion Table
13.1.8Emergency Measures for a Fault in the Potential Sensor
13.2 Image Adjustments
13.2.1Standards of Image Position
13.2.2Checking the Image Position
13.2.3Adjusting Side Registration
13.2.4Adjusting the Image Leading Edge Margin
13.2.5Adjusting the Left/Right Non-Image Width
13.2.6Adjusting the Leading Edge Non-Image Width
13.3 Scanning System
13.3.1After Replacing the Reader Controller PCB
13.3.2When Replacing the CCD Unit
13.3.3Adjusting the Position of the No
13.3.4When Replacing the Platen Board Glass
13.3.5When Replacing the Reading Glass
13.3.6When Replacing the Scanning Lamp
13.3.7When Replacing the Inverter PCB
13.4 Laser Exposure System
13.4.1When Replacing the Scanner Unit
13.5 Image Formation System
13.5.1Outline of the Charging Wire
13.5.2Routing the Charging Wire
13.5.3Routing the Grid for the Primary Charging Assembly
13.5.4Adjusting the Height of the Charging Wire
13.5.5Mounting the Cleaning Blade
13.5.6Mounting the Side Seal
13.6 Fixing System
13.6.1Applying Grease After Replacing the Fixing Roller
13.6.2Adjusting the Nip Width
13.6.3Adjusting the Position of the Fixing Web Solenoid (SL9)
13.6.4After Replacing the Fixing Web
13.6.5Adjusting the Position of he Fixing Inlet Guide Solenoid (SL1)
13.6.6Adjusting the Position of the Fixing Inlet Guide
13.7 Electrical Components
13.7.1When Replacing the DC Controller PCB
13.7.2When Replacing the HVT PCB
13.7.3After Replacing the HDD
13.7.4When Replacing the Main Controller PCB
13.8 Pickup/Feeding System
13.8.1Orientation of the Deck/Cassette Pickup Roller
13.8.2Orientation of the Separation Roller
13.8.3Orientation of the Feeding Roller of the Deck/Cassette Pickup Assembly
13.8.4Adjusting the Pressure of the Separation Roller of the Deck/Cassette
13.8.5Adjusting the Pressure of the Separation Roller of the Manual Feed Tray
13.8.6Adjusting the Position of the Pickup Solenoid (SL3, SL4) of the Cassette 3/4
13.8.7Adjusting the Position of the Delivery Flapper Solenoid (SL5)
13.8.8Adjusting the Position of the Right Deck Pickup Solenoid (SL6)
13.8.9Adjusting the Position of the Left Deck Pickup Solenoid (SL7)
13.8.10Adjusting the Position of the Reversing Flapper Solenoid(SL8)
13.8.11Attaching the Side Guide Timing Belt in the Manual Feed Tray Assembly
13.8.12Adjusting the Position of the Lifter Motor M20 (M21) of the Cassette 3 (cassette 4)

Chapter 14: CORRECTING FAULTY IMAGES
14.1 Making lnitial Checks
14.1.1Site Environment
14.1.2Checking the Originals for Symptoms
14.1.3Copyboard Cover, Copyboard Glass, and Standard White Plate
14.1.4Checking the Charging Assemblies
14.1.5Checking the Developing Assembly
14.1.6Checking the Paper
14.1.7Checking the Periodically Replaced Parts
14.1.8Image Adjustment Basic Procedure
14.1.9Others
14.2 Outline of Electrical Components
14.2.1 Clutch/Solenoid
14.2.1.1 Clutches and Solenoids
14.2.2 Motor
14.2.2.1 Motors
14.2.3 Fan
14.2.3.1 Fans
14.2.4 Sensor
14.2.4.1 Sensors
14.2.5 Switch
14.2.5.1 Switches
14.2.6 Lamps, Heaters, and Others
14.2.6.1 Lamps, Heaters, and Others
14.2.7 PCBs
14.2.7.1 PCBs
14.2.8 Connectors
14.2.8.1 Connectors

Chapter 15: SELF DIAGNOSIS
15.1 Error Code Table
15.1.1Error Code
15.2 Error Code Details
15.2.1Detail Error Code
15.2.2E602 in Detail
15.3 Error Code (SEND)
15.3.1Results of Self-Diagnosis
15.3.2Error Codes
15.4 Jam Code
15.4.1Jam Code (machine proper)
15.4.2Jam Code (finisher-related)
15.4.3Jam Code (ADF-related)
15.5 Alarm Code
15.5.1Alarm Code

Chapter 16: SERVICE MODE
16.1 Outline
16.1.1Service mode screen configuration
16.1.2Entering or selecting service modes
16.1.3Exiting service modes
16.1.4Backing Up Service Mode
16.1.5Initial screen
16.1.6Main/intermediate item screen
16.1.7Sub-item screen
16.2 DISPLAY(Status Display Mode)
16.2.1 COPIER
16.2.1.1 COPIER List
16.2.2 FEEDER
16.2.2.1 FEEDER List
16.3 I/O (I/O Display Mode)
16.3.1Outline
16.3.2
16.3.3
16.3.4
16.3.5
16.3.6
16.4 ADJUST(Adjustment Mode)
16.4.1 COPIER
16.4.1.1 COPIER List
16.4.2 FEEDER
16.4.2.1 FEEDER List
16.4.3 SORTER
16.4.3.1 SORTER List
16.5 FUNCTION (Operation/Inspection Mode)
16.5.1 COPIER
16.5.1.1 COPIER List
16.5.2 FEEDER
16.5.2.1 FEEDER List
16.6 OPTION (Machine Settings Mode)
16.6.1 COPIER
16.6.1.1 COPIER List
16.6.2 FEEDER
16.6.2.1 FEEDER List
16.6.3 SORTER
16.6.3.1 SORTER List
16.6.4 BOARD
16.6.4.1 BOARD List
16.7 TEST (Test Print Mode)
16.7.1 COPIER
16.7.1.1 COPIER List
16.8 COUNTER (Counter Mode)
16.8.1 COPIER
16.8.1.1 COPIER List

Chapter 17: UPGRADING
17.1 Outline
17.1.1Outline of Upgrading the Machine
17.1.2Outline of the Service Support Tool
17.2 Making Preparations
17.2.1Registering the System Software
17.2.2Making Connections
17.3 Formatting the HDD
17.3.1Formatting All Partitions
17.3.2Formatting Selected Partitions
17.3.3Formatting the Partitions
17.4 Downloading System Software
17.4.1 Downloading System
17.4.1.1 Outline
17.4.1.2 Downloading Procedure
17.4.2 Downloading RUI, and Language
17.4.2.1 Outline
17.4.2.2 Downloading Procedure
17.4.3 Downloading SDICT
17.4.3.1 Outline
17.4.3.2 Downloading Procedure
17.4.4 Downloading MEAPCONT
17.4.4.1 Outline
17.4.4.2 Downloading Procedure
17.4.5 Downloading KEY
17.4.5.1 Outline
17.4.5.2 Downloading Procedure
17.4.6 Downloading the TTS
17.4.6.1 Outline
17.4.6.2 Downloading Procedure
17.4.7 Downloading BOOT
17.4.7.1 Outline
17.4.7.2 Downloading Procedure
17.4.8 Downloading Dcon and Rcon
17.4.8.1 Outline
17.4.8.2 Downloading Procedure
17.4.9 Downloading G3 FAX
17.4.9.1 Outline
17.4.9.2 Downloading Procedure
17.4.10 Uploading and Downloading Backup Data
17.4.10.1 Outline
17.4.10.2 Uploading Procedure
17.4.10.3 Downloading Procedure

Chapter 18: SERVICE TOOLS
18.1 List of Special Tools
18.2 List of Solvents/Oils

Numbers of pages: 926.
File Data

This file is sold by onedollar, an independent seller on Tradebit.

File Size 24 megabytes
File Type PDF
Our Reviews
© Tradebit 2004-2024
All files are property of their respective owners
Questions about this file? Contact onedollar
DMCA/Copyright or marketplace issues? Contact Tradebit