$14.95
Download NowSold by onedollar on Tradebit
The world's largest download marketplace
3,250,280 satisfied buyers
The world's largest download marketplace
3,250,280 satisfied buyers
Canon MF7200, MF7100, MF7170i, Service Manual & Parts List
This service manual, is the full Canon MF7200, MF7100, MF7170i Service Repair Manual.
This manual is in the PDF format and have detailed Diagrams, pictures and full procedures to diagnose and repair your Canon MF7200, MF7100, MF7170i.
You can print, zoom or read any diagram, picture or page from this Service & Parts List Manual. Every chapter on this manual is fully detailed and contain all the simulation codes, trouble codes, maintenance procedures, reset procedures, diagnose procedures of Canon MF7200, MF7100, MF7170i. You can find easily everything what do you need.
To see what contain, please read table of contents:
Chapter 1: INTRODUCTION
1.1 System Construction
1.1.1 Pickup/ Delivery /Original Handling Accessories System Configuration (MF7170i)
1.1.2 Reader Heater/ Cassette Heater System Configuration (MF7170i)
1.1.3 Printing/Transmitting Accessories System Configuration (MF7170i)
1.1.4 Functions of the Printing/Transmission Functions (MF7170i)
1.2 Product Specifications
1.2.1 Names of Parts
1.2.1.1 External View (MF7170i)
1.2.1.2 Cross-Section
1.2.2 Using the Machine
1.2.2.1 Turning On the Power Switch
1.2.2.2 When Turning Off the Main Power Switch
1.2.2.3 Control Panel (MF7170i)
1.2.3 User Mode Items
1.2.3.1 Common Settings
1.2.3.2 Timer Settings
1.2.3.3 Adjustment/Cleaning
1.2.3.4 Report Settings
1.2.3.5 System Settings
1.2.3.6 Copy Settings
1.2.3.7 Communication Settings
1.2.3.8 Printer Settings
1.2.3.9 Address Book Settings
1.2.3.10 Recommended setting of system management information
1.2.3.11 The Reference Information of the Department ID Management
1.2.4 Maintenance by the User
1.2.4.1 User Maintenance Items
1.2.4.2 Cleaning
1.2.5 Safety
1.2.5.1 Safety of the Laser Light
1.2.5.2 CDRH Regulations
1.2.5.3 Handling the Laser Unit
1.2.5.4 Safety of Toner
1.2.5.5 Point to Note about Fire
1.2.5.6 Cautions as to the replacement and disposal of lithium battery
1.2.5.7 Storing and Handling the Cartridge Before Unpacking
1.2.5.8 Storing or Handling the Cartridge After Unpacking
1.2.6 Product Specifications
1.2.6.1 Product Specifications
1.2.7 Function List
1.2.7.1 Printing Speed (MF7100 Series)
1.2.7.2 Types of Paper
Chapter 2: INSTALLATION
2.1 Making Pre-Checks
2.1.1 Selecting the Site of Installation
2.1.2 Before Starting the Work
2.2 Unpacking and Installation
2.2.1 Unpacking and Removing the Packaging Materials
2.2.2 Installing the Toner Cartridge
2.2.3 Setting the Cassettes
2.2.4 Connecting the Cable
2.2.5 Checking the Image Quality
2.2.6 Setting the Country/Region
2.2.7 Setting the Date and Time
2.2.8 Attaching Other Parts
2.3 Checking the Connection to the Network
2.3.1 Checking the Network Connection
2.4 Flow of Accessory Installation
2.4.1 Flow of Accessary Installation
2.5 Installing the Card Reader
2.5.1 Points to Note
2.5.2 Checking the Contents
2.5.3 Installation Procedure
2.5.4 Registering the Card IDs
2.6 Installing the Heater PCB
2.6.1 Preparing the parts
2.6.2 Preparing the Host Machine
2.6.3 Installing the Heater PCB
2.7 Installing the Reader Heater
2.7.1 Preparing the parts
2.7.2 Installing the Reader Heater Harness
2.7.3 Removing Reader Components
2.7.4 Removing Parts at the Left of the Reader
2.7.5 Installing the Reader Heater
2.8 Installing the Cassette Heater
2.8.1 Preparing the parts
2.8.2 Preparing the Host Machine
2.8.3 Installing the Cassette Heater
Chapter 3: MAIN CONTROLLER
3.1 Overview/Configuration
3.1.1 Construction and Mechanisms
3.2 Outline of the Electrical Circuitry
3.2.1 Image Processor PCB
3.3 Image Processing
3.3.1 Overview of the Image Flow
3.3.2 Construction of the Image Processing Module
3.3.3 Reader Unit Input Image Processing
3.3.4 Compression/ Extesion/ Editing Block
3.3.5 Printer unit Output Image Processing
3.4 Image Data Flow
3.4.1 Flow of Image Data According to Copy Functions
3.4.2 Flow of Image Data for the SEND Function
3.4.3 Flow of Image Data for the Fax Transmission
3.4.4 Flow of Image Data for the Fax Reception Function
3.4.5 Flow of Image Data for the PDL Function
3.5 Parts Replacement Procedure
3.5.1 Main Controller PCB
3.5.1.1 Removing the Rear Cover
3.5.1.2 Removing the Left Cover (Rear)
3.5.1.3 Removing the RAM Cover
3.5.1.4 Removing the SDRAM
3.5.1.5 Removing the LAN Cover
3.5.1.6 Removing the IP Cover
3.5.1.7 Removing the Image Processor PCB
3.5.1.8 Procedure after Replacing the Image Processor PCB
3.5.2 SDRAM
3.5.2.1 Removing the Rear Cover
3.5.2.2 Removing the RAM Cover
3.5.2.3 Removing the SDRAM
Chapter 4: ORIGINAL EXPOSURE SYSTEM
4.1 Basic Constraction
4.1.1 Specifications, Control Methods, and Functions
4.1.2 Major Components
4.1.3 Control System Configuration
4.1.4 Reader Controller PCB
4.2 Basic Sequence
4.2.1 Basic Sequence at Power-on
4.2.2 Basic Sequence after Depression of Start Key (Book mode, One Sheet of original)
4.2.3 Basic Sequence after Depression of Start Key (ADF Mode, One Sheet of Original)
4.3 Various Control
4.3.1 Controlling the Scanner Drive System
4.3.1.1 Outline
4.3.1.2 Reader Motor Control
4.3.2 Contact Image Sensor (CIS)
4.3.2.1 Outline
4.3.2.2 Analog Control Performed by the CIS
4.3.3 Enlargement/Reduction
4.3.3.1 Magnification Change in Vertical Scan Direction
4.3.3.2 Magnification Change in Vertical Scan Direction
4.3.4 Dirt Sensor Control
4.3.4.1 Outline
4.3.5 Image Processing
4.3.5.1 Outline
4.3.5.2 CMOS Sensor Drive
4.3.5.3 CMOS Sensor Output Gain Correction and Offset Correction
4.3.5.4 CMOS Sensor Output A/D Conversion
4.3.5.5 Shading Correction (Outline)
4.3.5.6 Shading Adjustment
4.3.5.7 Shading Correction
4.4 Parts Replacement Procedure
4.4.1 Copyboard Glass
4.4.1.1 Removing the Copyboard Glass
4.4.1.2 Procedure after Replacing the Copyboard Glass
4.4.1.3 Removing the ADF Reading Glass
4.4.2 Reader Controller PCB
4.4.2.1 Removing the Rear Cover
4.4.2.2 Removing the Right Cover (Lower)
4.4.2.3 Removing the Right Cover (Upper)
4.4.2.4 Removing the Left Cover (Rear)
4.4.2.5 Removing the Reader Rear Cover
4.4.2.6 Removing the Copyboard glass
4.4.2.7 Removing the Reader Controller PCB
4.4.3 Reader Motor
4.4.3.1 Removing the Rear Cover
4.4.3.2 Removing the Right Cover (Lower)
4.4.3.3 Removing the Right Cover (Upper)
4.4.3.4 Removing the Left Cover (Rear)
4.4.3.5 Removing the Reader Rear Cover
4.4.3.6 Removing the Reader Motor
4.4.4 Contact Sensor
4.4.4.1 Removing the Rear Cover
4.4.4.2 Removing the Right Cover (Lower)
4.4.4.3 Removing the Right Cover (Upper)
4.4.4.4 Removing the Left Cover (Rear)
4.4.4.5 Removing the Reader Rear Cover
4.4.4.6 Removing the Copyboard Glass
4.4.4.7 Removing the Contact Image Sensor (CIS)
4.4.4.8 Procedure after Replacing the CIS
4.4.5 Copyboard Cover Open/Close Sensor
4.4.5.1 Removing the Rear Cover
4.4.5.2 Removing the Right Cover (Lower)
4.4.5.3 Removing the Right Cover (Upper)
4.4.5.4 Removing the Left Cover (Rear)
4.4.5.5 Removing the Reader Rear Cover
4.4.5.6 Removing the Copyboard Cover Open/Close Sensor (Front/Rear)
4.4.6 Contact Sensor HP Sensor
4.4.6.1 Removing the Copyboard Glass
4.4.6.2 Removing the ADF Reading Glass
4.4.6.3 Removing the Contact Sensor HP Sensor
4.4.7 Reader Heater (option)
4.4.7.1 Removing the Copyboard Glass
4.4.7.2 Removing the Reader Heater (Right)
4.4.7.3 Removing the Reader Front Cover
4.4.7.4 Removing the ADF Reading Glass
4.4.7.5 Removing the Reader Heater (Left)
Chapter 5: LASER EXPOSURE
5.1 Overview/Configuration
5.1.1 Overview
5.1.2 Specifications and Control Mechanism
5.1.3 Main Components
5.1.4 Control System Configuration
5.2 Controlling the Laser Activation Timing
5.2.1 Laser Emission ON/OFF Control
5.2.2 Horizontal Synchronization Control
5.3 Controlling the Intensity of Laser Light
5.3.1 Automatic Photocurrent Control (APC)
5.4 Controlling the Laser Scanner Motor
5.4.1 Laser Scanner Motor Control
5.5 Controlling the Laser Shutter
5.5.1 Laser Shutter Control
5.6 Parts Replacement Procedure
5.6.1 Laser/Scanner Unit
5.6.1.1 Removing the Rear Cover
5.6.1.2 Removing the Right Cover (Lower)
5.6.1.3 Removing the Delivery Tray
5.6.1.4 Removing the Laser Scanner Unit
Chapter 6: IMAGE FORMATION
6.1 Overview/Configuration
6.1.1 Specifications of Image Formation System
6.1.2 Major Components of Image Formation System
6.2 Image Formation Process
6.2.1 Image Formation Process
6.3 Basic Sequence
6.3.1 Basic Sequence of Operation
6.4 Driving and Controlling the High-Voltage System
6.4.1 Outline
6.4.2 Primary Charging Bias Control
6.4.3 Developing Bias Control
6.5 Secondary Transfer Mechanism
6.5.1 Outline
6.5.2 Transfer Roller Bias Control
6.5.3 Static Eliminator Bias Control
6.6 Parts Replacement Procedure
6.6.1 Transfer Charging Roller
6.6.1.1 Removing the Transfer Charging Roller
Chapter 7: PICKUP AND FEED SYSTEM
7.1 Overview/Configuration
7.1.1 Specifications/Configuration/Operation Methods
7.1.2 Locations of Main Units
7.1.3 Roller Layout Drawing
7.1.4 Paper Path Drawing(Printer on its own)
7.1.5 Paper Path Drawing(Finisher-U1)
7.1.6 Paper Path Drawing(Duplex Unit-A1/Finisher-U1)
7.1.7 Paper Path Drawing(Duplex-A1)
7.1.8 Paper Path Drawing(Duplex-A1/Inner 2Way Tray-E1)
7.1.9 Paper Path Drawing(Inner 2Way Tray-E1)
7.1.10 Sensor Layout Drawing
7.2 Detection Jams
7.2.1 Delay Jams
7.2.1.1 Delay Jam in Pickup Assembly
7.2.1.2 Delay Jam in Delivery Assembly (Paper Leading Edge Jam at First Delivery Sensor/Wound Paper Jam at Fixing Assembly)
7.2.2 Stationary Jams
7.2.2.1 Stationary Jam in Pickup Assembly
7.2.2.2 Stationary Jam in Delivery Assembly (Paper Trailing Edge Stationary Jam at First Delivery Sensor/Stationary Jam at Delivery Sensor)
7.2.3 Other Jams
7.2.3.1 Door Open Jam
7.3 Cassette Pickup Unit
7.3.1 Overview
7.3.2 Cassette Pickup Operation
7.3.3 Cassette Paper Size Detection
7.4 Manual Feed Pickup Unit
7.4.1 Overview
7.4.2 Post-pickup Control after Multi Manual Feed Pickup
7.5 Parts Replacement Procedure
7.5.1 Cassette Pickup Assembly
7.5.1.1 Removing the Lower-left Cover
7.5.1.2 Removing the Cassette Pickup Assembly
7.5.2 Cassette Pickup Roller
7.5.2.1 Removing the Cassette Paper Pickup Roller
7.5.3 Cassette Paper Sensor
7.5.3.1 Removing the Lower-left Cover
7.5.3.2 Removing the Cassette Pickup Assembly
7.5.3.3 Removing the Cassette Paper Presence/Absence Sensor
7.5.4 Cassette Size Sensor
7.5.4.1 Removing the Paper Size Detection Switches
7.5.5 Cassette Retry Paper Sensor
7.5.5.1 Removing the Lower-left Cover
7.5.5.2 Removing the Cassette Pickup Assembly
7.5.5.3 Removing the Retry Sensor
7.5.6 Cassette Pickup Solenoid
7.5.6.1 Removing the Lower-left Cover
7.5.6.2 Removing the Cassette Pickup Assembly
7.5.6.3 Removing the Cassette Pickup Solenoid
7.5.7 Separation Roller
7.5.7.1 Removing the Feed and Separation Rollers
7.5.8 Manual Pickup Roller
7.5.8.1 Removing the Toner Cartridge
7.5.8.2 Removing the Transfer Registration Unit
7.5.8.3 Removing the Feed Guide
7.5.8.4 Removing the Multifeeder Pickup Roller
7.5.9 Manual Feed Tray Paper Sensor
7.5.9.1 Removing the Toner Cartridge
7.5.9.2 Removing the Transfer Registration Unit
7.5.9.3 Removing the Feed Guide
7.5.9.4 Removing the Multifeeder Paper Presence/Absence Sensor
7.5.10 Manual Pickup Solenoid
7.5.10.1 Removing the Toner Cartridge
7.5.10.2 Removing the Transfer Registration Unit
7.5.10.3 Removing the Feed Guide
7.5.10.4 Removing the Multifeeder Connector Cover
7.5.10.5 Removing the Multifeeder Unit
7.5.10.6 Removing the Multifeeder Pickup Solenoid
7.5.11 Registration Roller
7.5.11.1 Removing the Toner Cartridge
7.5.11.2 Removing the Registration Roller
7.5.12 Registration Clutch
7.5.12.1 Removing the Rear Cover
7.5.12.2 Removing the Registration Clutch
7.5.13 Separation Pad
7.5.13.1 Removing the Toner Cartridge
7.5.13.2 Removing the Transfer Registration Unit
7.5.13.3 Removing the Feed Guide
7.5.13.4 Removing the Multifeeder Pickup Roller
7.5.13.5 Removing the Separation Pad
Chapter 8: FIXING SYSTEM
8.1 Overview/Configuration
8.1.1 Specifications, Control Mechanisms, and Functions
8.1.2 Major Components
8.2 Various Control Mechanisms
8.2.1 Controlling the Speed of the Fixing Film
8.2.1.1 Controlling the Fixing Film Speed
8.2.2 Controlling the Fixing Film Temperature
8.2.2.1 Outline
8.2.2.2 Controlling the Fixing Film Temperature
8.2.2.3 Target Temperatures by Mode
8.2.3 Detecting the Passage Paper
8.2.3.1 Detecting the Passage of Paper
8.3 Protection Function
8.3.1 Protective Functions
8.4 Parts Replacement Procedure
8.4.1 Fixing Unit
8.4.1.1 Removing the Toner Cartridge
8.4.1.2 Removing the Rear Cover
8.4.1.3 Removing the Left Cover (Rear)
8.4.1.4 Removing the Left Door
8.4.1.5 Removing the Fixing Unit
8.4.2 Fixing Film Unit
8.4.2.1 Removing the Toner Cartridge
8.4.2.2 Removing the Rear Cover
8.4.2.3 Removing the Left Cover (Rear)
8.4.2.4 Removing the Left Door
8.4.2.5 Removing the Fixing Unit
8.4.2.6 Removing the Fixing Film Unit
8.4.3 Fixing Pressure Roller
8.4.3.1 Removing the Toner Cartridge
8.4.3.2 Removing the Rear Cover
8.4.3.3 Removing the Left Cover (Rear)
8.4.3.4 Removing the Left Door
8.4.3.5 Removing the Fixing Unit
8.4.3.6 Removing the Fixing Film Unit
8.4.3.7 Removing the Pressure Roller
8.4.4 Fixing Delivery Paper Sensor
8.4.4.1 Removing the Toner Cartridge
8.4.4.2 Removing the Rear Cover
8.4.4.3 Removing the Left Cover (Rear)
8.4.4.4 Removing the Left Door
8.4.4.5 Removing the Fixing Unit
8.4.4.6 Removing the Fixing Delivery Sensor
8.4.5 Fixing Film Sensor
8.4.5.1 Removing the Toner Cartridge
8.4.5.2 Removing the Rear Cover
8.4.5.3 Removing the Left Cover (Rear)
8.4.5.4 Removing the Left Door
8.4.5.5 Removing the Fixing Unit
8.4.5.6 Removing the Fixing Film Sensor
Chapter 9: EXTERNAL AND CONTROLS
9.1 Control Panel
9.1.1 Overview
9.2 Fan
9.2.1 Overview
9.2.2 Fan Control
9.3 Power Supply
9.3.1 Power Supply
9.3.1.1 Outline (MF7170i)
9.3.1.2 Rated Output of the Power Supply PCB
9.3.2 Protection Function
9.3.2.1 Protective Mechanisms
9.4 Parts Replacement Procedure
9.4.1 Rear Cover
9.4.1.1 Removing the Rear Cover
9.4.2 Upper Right Cover
9.4.2.1 Removing the Rear Cover
9.4.2.2 Removing the Right Cover (Lower)
9.4.2.3 Removing the Right Cover (Upper)
9.4.3 Lower Right Cover
9.4.3.1 Removing the Rear Cover
9.4.3.2 Removing the Right Cover (Lower)
9.4.4 Left Rear Cover
9.4.4.1 Removing the Rear Cover
9.4.4.2 Removing the Left Cover (Rear)
9.4.5 Reader Front Cover
9.4.5.1 Removing the Reader Front Cover
9.4.6 Reader Rear Cover
9.4.6.1 Removing the Rear Cover
9.4.6.2 Removing the Right Cover (Lower)
9.4.6.3 Removing the Right Cover (Upper)
9.4.6.4 Removing the Left Cover (Rear)
9.4.6.5 Removing the Reader Rear Cover
9.4.7 Delivery Tray
9.4.7.1 Removing the Rear Cover
9.4.7.2 Removing the Right Cover (Lower)
9.4.7.3 Removing the Delivery Tray
9.4.8 Left Door
9.4.8.1 Removing the Toner Cartridge
9.4.8.2 Removing the Rear Cover
9.4.8.3 Removing the Left Cover (Rear)
9.4.8.4 Removing the Left Door
9.4.9 Main Drive Unit
9.4.9.1 Removing the Toner Cartridge
9.4.9.2 Removing the Rear Cover
9.4.9.3 Removing the Left Cover (Rear)
9.4.9.4 Removing the Main Motor
9.4.9.5 Removing the Registration Clutch
9.4.9.6 Removing the Main Drive Unit
9.4.10 Fixing Drive Unit
9.4.10.1 Removing the Toner Cartridge
9.4.10.2 Removing the Rear Cover
9.4.10.3 Removing the Left Cover (Rear)
9.4.10.4 Removing the Left Door
9.4.10.5 Removing the Fixing Unit
9.4.10.6 Removing the RAM Cover
9.4.10.7 Removing the SDRAM
9.4.10.8 Removing the LAN Cover
9.4.10.9 Removing the IP Cover
9.4.10.10 Removing the Image Processor PCB Mount
9.4.10.11 Removing the Fixing Drive Unit
9.4.11 Operation Panel Unit
9.4.11.1 Removing the Reader Front Cover
9.4.11.2 Removing the Operation Panel Unit
9.4.12 DC Controller PCB
9.4.12.1 Removing the Rear Cover
9.4.12.2 Removing the DC Controller PCB
9.4.13 Powwer Supply PCB
9.4.13.1 Removing the Rear Cover
9.4.13.2 Removing the Right Cover (Lower)
9.4.13.3 Removing the Delivery Tray
9.4.13.4 Removing the Main Power Supply PCB
9.4.14 HVT PCB
9.4.14.1 Removing the Rear Cover
9.4.14.2 Removing the Right Cover (Lower)
9.4.14.3 Removing the Delivery Tray
9.4.14.4 Removing the Main Power Supply PCB
9.4.14.5 Removing the HVT PCB
9.4.15 Main Drive Motor
9.4.15.1 Removing the Rear Cover
9.4.15.2 Removing the Main Motor
9.4.16 Fixing Drive Motor
9.4.16.1 Removing the Rear Cover
9.4.16.2 Removing the Left Cover (Rear)
9.4.16.3 Removing the RAM Cover
9.4.16.4 Removing the SDRAM
9.4.16.5 Removing the LAN Cover
9.4.16.6 Removing the IP Cover
9.4.16.7 Removing the Image Processor PCB Mount
9.4.16.8 Removing the Fixing Unit Drive Motor
9.4.17 Fixing Heat Discharge Fan
9.4.17.1 Removing the Fixing Heat Discharge Fan
9.4.18 Fan Filter
9.4.18.1 Removing the Fan Filter
Chapter 10: MAINTENANCE AND INSPECTION
10.1 Periodically Replaced Parts
10.1.1 Overview
10.1.2 Reader Unit
10.1.3 Printer Unit
10.2 Consumables
10.2.1 Overview
10.2.2 Reader Unit
10.2.3 Printer Unit
10.3 Periodical Service
10.3.1 Scheduled Servicing
Chapter 11: MEASUREMENT AND ADJUSTMENTS
11.1 Scanning System
11.1.1 Procedure after Replacing the CIS
11.1.2 Procedure after Replacing the Copyboard Glass
11.2 Electrical Adjustments
11.2.1 Procedure after Replacing the Image Processor PCB
11.2.2 Procedure after Replacing the USB Memory
11.2.3 Actions to Take before All Clearing (Backing up the User Data)
Chapter 12: CORRCETING FAULTY IMAGES
12.1 Initial Checkup
12.1.1 Site Environment
12.1.2 Checking the Paper
12.1.3 Checking the Placement of Paper
12.1.4 Checking the Durables
12.1.5 Checking the Units and Functional Systems
12.1.6 Others
12.2 Outline of Electrical Components
12.2.1 Cluth/Solenoid
12.2.1.1 List of Clutches/Solenoids
12.2.2 Motor
12.2.2.1 List of Motors
12.2.3 Fan
12.2.3.1 List of Fans
12.2.4 Sensor
12.2.4.1 List of Sensors
12.2.5 Switch
12.2.5.1 List of Switches
12.2.6 Lamps, Heaters, and Others
12.2.6.1 List of Lamps, Heaters, and Others
12.2.7 PCBs
12.2.7.1 List of PCBs
Chapter 13: ERROR CODE
13.1 Error Code Table
13.1.1 List of Error Codes
13.2 Error Code Details
13.2.1 Error Code Details
13.3 Jam Code
13.3.1 Jam Codes (Related to Printer Unit)
13.3.2 Jam Codes (Related to Finisher)
13.3.3 Jam Codes (Related to ADF)
13.3.4 Jam Codes (Related to Duplex Unit)
13.3.5 Jam Codes (Related to Inner 2-way Tray)
13.4 Finisher Error Codes
13.4.1 Error Code Details
13.5 Fax Error Codes
13.5.1 Outline
13.5.1.1 Error Code Outline
13.5.2 User Error Code
13.5.2.1 User Error Code
13.5.3 Service Error Code
13.5.3.1 Service Error Code
Chapter 14: SERVICE MODE
14.1 Outline
14.1.1 Outline of Service Mode
14.1.2 Using the Mode
14.2 Default Settings
14.2.1 Service Mode Menus
14.3 Service Soft Switch Settings (SSSW)
14.3.1 Outline
14.3.1.1 Bit Switch Composition
14.3.2 SSSW-SW01:
14.3.2.1 List of Functions
14.3.2.2 Detailed Discussions of Bit 0
14.3.3 SSSW-SW03
14.3.3.1 List of Functions
14.3.3.2 Detailed Discussions of Bit 7
14.3.4 SSSW-SW04
14.3.4.1 List of Functions
14.3.4.2 Detailed Discussions of Bit 2
14.3.4.3 Detailed Discussions of Bit 3
14.3.4.4 Detailed Discussions of Bit 4
14.3.4.5 Detailed Discussions of Bit 6
14.3.4.6 Detailed Discussions of Bit 7
14.3.5 SSSW-SW05
14.3.5.1 List of Functions
14.3.5.2 Detailed Discussions of Bit 1
14.3.5.3 Detailed Discussions of Bit 2
14.3.6 SSSW-SW12
14.3.6.1 List of Functions
14.3.7 SSSW-SW13
14.3.7.1 List of Functions
14.3.7.2 Detailed Discussions of Bit 2
14.3.8 SSSW-SW14
14.3.8.1 List of Functions
14.3.8.2 Detailed Discussions of Bit 2
14.3.8.3 Detailed Discussions of Bit 4
14.3.9 SSSW-SW28
14.3.9.1 List of Functions
14.3.9.2 Detailed Discussions of Bit 0
14.3.9.3 Detailed Discussions of Bit 1
14.3.9.4 Detailed Discussions of Bit 2
14.3.9.5 Detailed Discussions of Bit 3
14.3.9.6 Detailed Discussions of Bit 4
14.3.9.7 Detailed Discussions of Bit 5
14.3.10 SSSW-SW30
14.3.10.1 List of Functions
14.3.10.2 Detailed Discussions of Bit 5
14.3.11 SSSW-SW33
14.3.11.1 List of Functions
14.3.11.2 Detailed Discussions of Bit 0
14.3.11.3 Detailed Discussions of Bit 1
14.3.11.4 Detailed Discussions of Bit 2
14.3.11.5 Detailed Discussions of Bit 3
14.4 Menu Switch Settings (MENU)
14.4.1 Menu Switch Composition
14.4.2
14.4.3
14.4.4
14.4.5
14.4.6
14.4.7
14.5 Numeric Parameter Settings (NUMERIC Param.)
14.5.1 Numerical Parameter Composition
14.5.2
14.5.3
14.5.4
14.5.5
14.5.6
14.5.7
14.5.8
14.5.9
14.5.10
14.5.11
14.5.12
14.5.13
14.5.14
14.5.15
14.6 Scanner Function Settings (SCANNER)
14.6.1 Setting of Bit Switch
14.6.2 Numeric Parameter Functional configuration
14.6.3
14.6.4
14.6.5
14.6.6
14.6.7
14.6.8
14.6.9
14.6.10
14.6.11
14.6.12
14.6.13
14.6.14
14.6.15
14.6.16
14.6.17
14.6.18
14.6.19
14.6.20
14.6.21
14.6.22
14.6.23
14.6.24
14.6.25
14.6.26
14.7 Printer Function Settings (PRINTER)
14.7.1 Service Soft Switch Settings (SSSW)
14.7.1.1 SSSW-SW05
14.7.1.2 SSSW-SW14
14.7.1.3 SSSW-SW15
14.7.2 Numeric Parameter Settings (NUMERIC Param.)
14.7.2.1 List of Functions
14.7.2.2
14.7.2.3
14.7.2.4
14.7.2.5
14.7.2.6
14.7.2.7
14.7.2.8
14.7.2.9
14.7.2.10
14.7.2.11
14.7.2.12
14.7.2.13
14.7.2.14
14.7.2.15
14.7.2.16
14.7.2.17
14.7.3 Setting of Cassette (CST)
14.7.3.1 Special Standard-sized Paper Compatibility
14.8 Setting of System Functions (SYSTEM)
14.8.1 Bit Switch Settings
14.9 Registration of Accessories (ACC)
14.9.1 Accessory Registration
14.10 Counter Indication (COUNTER)
14.10.1 Counters
14.10.2 Clearing Counters
14.11 Report Output (REPORT)
14.11.1 Report Output
14.11.2 System Data List
14.11.3 System Dump List
14.11.4 Counter List
14.11.5 Error Log List
14.11.6 Spec List
14.11.7 Service Label
14.12 Download (DOWNLOAD)
14.12.1 Download
14.13 Data Initialization Mode (CLEAR)
14.13.1 Clear
14.14 Error Display (ERROR DISPLAY)
14.14.1 Error Display
14.15 ROM Management (ROM)
14.15.1 ROM Display
14.16 Test Mode (TEST)
14.16.1 Overview
14.16.1.1 Outline
14.16.1.2 Test Mode Menu List
14.16.2 DRAM Test
14.16.2.1 D-RAM test
14.16.3 Scan Test
14.16.3.1 Scan Test ((2) SCAN TEST)
14.16.4 Print Test
14.16.4.1 Print Test ((3) PRINT TEST)
14.16.5 Modem Test
14.16.5.1 MODEM Test((4) MODEM TEST)
14.16.6 Faculty Test
14.16.6.1 Function Test ((6) FUNCTION TEST)
14.16.7 Cleaning Mode
14.16.7.1 Roller Cleaning Mode ((0) ROLLER CLEAN)
Chapter 15: UPGRADING
15.1 Outline
15.1.1 Overview of Upgrade
15.1.2 Overview of Service Support Tool
15.2 Making Preparations
15.2.1 Registering the System Software
15.2.2 Connection
15.3 Downloading System Software
15.3.1 Downloading the System Software
15.3.1.1 Downloading Procedure
15.3.2 Downloading the Boot Software
15.3.2.1 Downloading Procedure
15.3.3 Downloading the Language Module
15.3.3.1 Downloading Procedure
15.3.4 Otehr Upgrade Methods
15.3.4.1 Downloading the PCL Software
Chapter 16: SERVICE TOOLS
16.1 Service Tools
16.1.1 Special Tools
16.1.2 Oils and Solvents
Numbers of pages: 376.
File Data
This file is sold by onedollar, an independent seller on Tradebit.
| File Size | 22 megabytes |
| File Type |